Valor de campo no disponible

#include <ThingSpeak.h>
//#include "WiFi.h"
#include <ESP8266WiFi.h>
#include <Wire.h>

#include <Adafruit_ADS1X15.h>
#include <LiquidCrystal_I2C.h>


#define SDA_PIN D2 
#define SCL_PIN D1 

Adafruit_ADS1115 ads; 
LiquidCrystal_I2C lcd(0x27, 16, 2);

const float NIVEL_INFERIOR = 10000.0;
const float NIVEL_SUPERIOR = 49900.0;
int litros;
int centimetros;
unsigned long tiempoadc = 0;

const char* ssid = "RED .4G";
const char* password = "xxxxxxxxxx";

const char* server = "api.thingspeak.com";
unsigned long channelID = 330507;              
const char* WriteAPIKey = "xxxxxxxxxxxxxxxx";    

WiFiClient cliente;

void setup() {
  Serial.begin(115200);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(1000);
    Serial.println("Conectando a la red WiFi...");
  }
  Serial.println("Conectado a la red WiFi");

  // Inicialización del display LCD
  Wire.begin(SDA_PIN, SCL_PIN); 
  ads.begin(0x48); 
  lcd.begin(16, 2);
  lcd.init();
  lcd.backlight();
  lcd.clear();
  lcd.setCursor(0, 0);
  Serial.begin(9600);

  ads.setGain(GAIN_TWOTHIRDS);
  ads.begin();

  lcd.setCursor(0, 0);
  lcd.print("  INTERPRISE MX ");
  lcd.setCursor(0, 1);
  lcd.print("     AGUA CRUDA ");
  delay(5000);

  lcd.clear();
  pinMode(D6, OUTPUT); 
  pinMode(D5, OUTPUT); 
  digitalWrite(D6, HIGH);
  digitalWrite(D5, HIGH);
  tiempoadc = millis();
  ThingSpeak.begin(cliente);
  ThingSpeak.writeFields(channelID, WriteAPIKey);
}

void loop() {
  
  if (millis() - tiempoadc > 500UL) {
    tiempoadc = millis();

    short adc0 = ads.readADC_SingleEnded(0);
    float centimetros = (adc0 / 53.40);
    float litros = (centimetros * 212.1);

    if (litros < NIVEL_INFERIOR) {
      digitalWrite(D5, LOW);
    } else {
      digitalWrite(D5, HIGH);
    }

    if (litros > NIVEL_SUPERIOR) {
      digitalWrite(D6, LOW);
    } else {
      digitalWrite(D6, HIGH);
    }
    Serial.print("litros    ");
    Serial.println(litros);
    Serial.print("ctm:  ");
    Serial.println(centimetros);
    Serial.print("A0: ");
    Serial.println(adc0);

    lcd.setCursor(0, 0);
    lcd.print("lts   ");
    lcd.print(litros);
    lcd.setCursor(0, 1);
    lcd.print("cm  ");
    lcd.print(centimetros);

    ThingSpeak.setField (1, litros);
    ThingSpeak.setField (2, centimetros);
    ThingSpeak.setField (channelID, WriteAPIKey );
    Serial.println("datos enviados a ThingSpeak");
    delay(60000); 
  }
}

[Christopher Stapels]

Can you describe your issue in a little more detail? What is your hardware? What have you tried?

That said, my best guess is that you have not enabled the appropriate fields on ThingSpeak. In the channel settings on your channel view, click the enable box for the fields that you want to be able to read.

Please let us know if that helps.

[Felipe]

Hola Christopher, mi Hardware placa: "NodeMCU 1.0 (ESP-12E Module" a mi me parece que mi problema esta en //#include "WiFi.h" que tengo co

Arduino:1.8.19 (Windows 10), Tarjeta:"NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Disabled (new aborts on oom), Disabled, All SSL ciphers (most compatible), 32KB cache + 32KB IRAM (balanced), Use pgm_read macros for IRAM/PROGMEM, 4MB (FS:2MB OTA:~1019KB), 2, v2 Lower Memory, Disabled, None, Only Sketch, 115200"





















ATENCIÓN: la librería LiquidCrystal_I2C pretende ejecutarse sobre arquitectura(s) avr y puede ser incompatible con tu actual tarjeta la cual corre sobre arquitectura(s) esp8266.

C:\Users\felip\Videos\arduino-1.8.19\portable\sketchbook\reposici_n_cisterna_foro_think\reposici_n_cisterna_foro_think.ino: In function 'void setup()':

reposici_n_cisterna_foro_think:32:14: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]

   32 |   WiFi.begin(ssid, password);

      |              ^~~~

      |              |

      |              const char*

In file included from C:\Users\felip\Videos\arduino-1.8.19\portable\sketchbook\reposici_n_cisterna_foro_think\reposici_n_cisterna_foro_think.ino:2:

C:\Users\felip\Videos\arduino-1.8.19\portable\sketchbook\libraries\WiFi\src/WiFi.h:79:21: note:   initializing argument 1 of 'int WiFiClass::begin(char*, const char*)'

   79 |     int begin(char* ssid, const char *passphrase);

      |               ~~~~~~^~~~

Se encontraron varias bibliotecas para "WiFi.h"

Usado: C:\Users\felip\Videos\arduino-1.8.19\portable\sketchbook\libraries\WiFi

 No usado: C:\Users\felip\Videos\arduino-1.8.19\libraries\WiFi

exit status 1

invalid conversion from 'const char*' to 'char*' [-fpermissive]



Este informe podría contener más información con
"Mostrar salida detallada durante la compilación"
opción habilitada en Archivo -> Preferencias.

mentada esta linea porque si la descomento me da error en esta linea WiFi.begin(ssid, password);este es el error completo

[Felipe]

Ya intente en configuracón, y no e podido resolver el problema, quiero leer el nivel de agua en un deposito de 50,000 litros, el código funciona bien da la información en monitor Serial, LCD, es una sonda que envia una señal de 4-20 mA ,esa señal un modulo la convierte en 0 a 5 volts, y ADS1115 convierte la señal analogica en digital vía I2C, y esp8266 debe enviar los datos ThingSpeark, esp8266 si se conecta a internet al parecer no envia la informacion al servidor de ThingSpeark, no creo que el problema este el canal o en los campos de ThingSpeark.

Uso el IDE de Arduino para subir los programas a la placa esp8266.

Saludos desde queretaro MX

[Christopher Stapels]

I suggest looking a the example code to help you with that error. The example uses char variable[] instead of const char *

char ssid[] = SECRET_SSID;   // your network SSID (name) 
char pass[] = SECRET_PASS;   // your network password

Answer 1

[Christopher Stapels]

Here are a few things I notice about your code.

You run this line in the setup function, im not sure why.

   ThingSpeak.setField (channelID, WriteAPIKey );

You also have this line in your loop, that seems to execute the function every 500 miliseconds. That is way too frequent to write to ThingSpeak, and might result in your accoubnt being blocked.

 if (millis() - tiempoadc > 500UL) {

Fortunately, your code doesnt yet send data to ThingSpeak in the loop. Make sure you increase the delay to at least 15000UL if you have a free account ot 1000 if you have a paid account.

This line at the end of the main loop is incorrect for sure (the comment says "data sent to ThingSpeak", but the setField command you have does not send data.)

     ThingSpeak.setField (channelID, WriteAPIKey );

Here is where you want to use the writeFields command

have a look at this example code from the library. The example I linked is for esp32, but there is also very similar code for esp8266 in the repo.

If you fix those things, it should start to work soon, please let us know!

[Felipe]

Ok, aplico tu consejos y te comento. Saludos

[Felipe]

Primer punto, le agregue la librería secrets y me dio el mismo error deduzco que el problema esta en la librería #include <WiFi.h> esta la baje de github tendras un enlace para descagar la librería correcta #include <WiFi.h>, respecto al tiempo al final de códgo hay un delay(60000); solo envia información cada minuto y encuanto funcione sera de 10 minutos que suba información

Arduino:1.8.19 (Windows 10), Tarjeta:"NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Disabled (new aborts on oom), Disabled, All SSL ciphers (most compatible), 32KB cache + 32KB IRAM (balanced), Use pgm_read macros for IRAM/PROGMEM, 4MB (FS:2MB OTA:~1019KB), 2, v2 Lower Memory, Disabled, None, Only Sketch, 115200"


C:\Users\felip\Videos\arduino-1.8.19\portable\sketchbook\ejemplo_spikers\ejemplo_spikers.ino: In function 'void setup()':

ejemplo_spikers:51:8: error: 'class WiFiClass' has no member named 'mode'

   51 |   WiFi.mode(WIFI_STA);

      |        ^~~~

ejemplo_spikers:51:13: error: 'WIFI_STA' was not declared in this scope

   51 |   WiFi.mode(WIFI_STA);

      |             ^~~~~~~~

Se encontraron varias bibliotecas para "WiFi.h"

Usado: C:\Users\felip\Videos\arduino-1.8.19\portable\sketchbook\libraries\WiFi

 No usado: C:\Users\felip\Videos\arduino-1.8.19\libraries\WiFi

exit status 1

'class WiFiClass' has no member named 'mode'



Este informe podría contener más información con
"Mostrar salida detallada durante la compilación"
opción habilitada en Archivo -> Preferencias.

[Felipe]

//ThingSpeak.writeFields(channelID, WriteAPIKey);

[Felipe]

Esta linea que de momento, la comente para que no cause conflictos. Saludos

Answer 2

[Felipe]

/*
  ReadField
  
  Description: Demonstates reading from a public channel which requires no API key and reading from a private channel which requires a read API key.
               The value read from the public channel is the current outside temperature at MathWorks headquaters in Natick, MA.  The value from the
               private channel is an example counter that increments every 10 seconds.
  
  Hardware: ESP8266 based boards
  
  !!! IMPORTANT - Modify the secrets.h file for this project with your network connection and ThingSpeak channel details. !!!
  
  Note:
  - Requires ESP8266WiFi library and ESP8622 board add-on. See https://github.com/esp8266/Arduino for details.
  - Select the target hardware from the Tools->Board menu
  - This example is written for a network using WPA encryption. For WEP or WPA, change the WiFi.begin() call accordingly.
  
  ThingSpeak ( https://www.thingspeak.com ) is an analytic IoT platform service that allows you to aggregate, visualize, and 
  analyze live data streams in the cloud. Visit https://www.thingspeak.com to sign up for a free account and create a channel.  
  
  Documentation for the ThingSpeak Communication Library for Arduino is in the README.md folder where the library was installed.
  See https://www.mathworks.com/help/thingspeak/index.html for the full ThingSpeak documentation.
  
  For licensing information, see the accompanying license file.
  
  Copyright 2020, The MathWorks, Inc.
*/

#include <ESP8266WiFi.h>
#include "secrets.h"
#include "ThingSpeak.h" // always include thingspeak header file after other header files and custom macros

char ssid[] = SECRET_SSID;   // your network SSID (name) 
char pass[] = SECRET_PASS;   // your network password
int keyIndex = 0;            // your network key Index number (needed only for WEP)
WiFiClient  client;

// Weather station channel details
unsigned long weatherStationChannelNumber = SECRET_CH_ID_WEATHER_STATION;
unsigned int temperatureFieldNumber = 4;

// Counting channel details
unsigned long counterChannelNumber = SECRET_CH_ID_COUNTER;
const char * myCounterReadAPIKey = SECRET_READ_APIKEY_COUNTER;
unsigned int counterFieldNumber = 1; 

void setup() {
  Serial.begin(115200);  // Initialize serial
  while (!Serial) {
    ; // wait for serial port to connect. Needed for Leonardo native USB port only
  }
  
  WiFi.mode(WIFI_STA); 
  ThingSpeak.begin(client);  // Initialize ThingSpeak
}

void loop() {

  int statusCode = 0;
  
  // Connect or reconnect to WiFi
  if(WiFi.status() != WL_CONNECTED){
    Serial.print("Attempting to connect to SSID: ");
    Serial.println(SECRET_SSID);
    while(WiFi.status() != WL_CONNECTED){
      WiFi.begin(ssid, pass); // Connect to WPA/WPA2 network. Change this line if using open or WEP network
      Serial.print(".");
      delay(5000);     
    } 
    Serial.println("\nConnected");
  }

  // Read in field 4 of the public channel recording the temperature
  float temperatureInF = ThingSpeak.readFloatField(weatherStationChannelNumber, temperatureFieldNumber);  

  // Check the status of the read operation to see if it was successful
  statusCode = ThingSpeak.getLastReadStatus();
  if(statusCode == 200){
    Serial.println("Temperature at MathWorks HQ: " + String(temperatureInF) + " deg F");
  }
  else{
    Serial.println("Problem reading channel. HTTP error code " + String(statusCode)); 
  }
  
  delay(15000); // No need to read the temperature too often.

  // Read in field 1 of the private channel which is a counter  
  long count = ThingSpeak.readLongField(counterChannelNumber, counterFieldNumber, myCounterReadAPIKey);  

   // Check the status of the read operation to see if it was successful
  statusCode = ThingSpeak.getLastReadStatus();
  if(statusCode == 200){
    Serial.println("Counter: " + String(count));
  }
  else{
    Serial.println("Problem reading channel. HTTP error code " + String(statusCode)); 
  }
  
  delay(15000); // No need to read the counter too often.
  
}

[Felipe]

Hola estoy intentando con códigos de ejmplo de la librería ThingSpeark tiene el código una pestaña anexa donde de pone la informacón de el modem #define SECRET_SSID la contraseña #define SECRET_PASS

[Christopher Stapels]

Yes, sometimes people like to keep the passwords in a seperate file. That way when you post your code, you arent giving them away. Do you have a question about this?