- You have to design the Simulink model and deploy the generated code into the Zynq SoC and establish the communication with transceiver you may need to check how to connect transceiver with the SoC. Refer: https://www.mathworks.com/help/soc/ug/wlan-hdl-receiver-using-analog-devices-ad9361-ad9364.html, for beam forming: https://www.mathworks.com/help/dsphdl/ug/design-an-hdl-beamforming-algorithm-in-simulink.html and https://www.mathworks.com/help/phased/ug/hdl-code-generation-and-verification-of-a-beamforming-algorithm-in-simulink.html. There's an example contribution in the file exchange you can also refer to it: https://www.mathworks.com/matlabcentral/fileexchange/89619-fpga-adaptive-beamforming-and-radar-examples
- Develop code to interface with the AD-FMCOMMS5 and ZYNQ using compatible libraries (check Analog Devices resources).
Can Matlab work with AD-FMCOMMS5 connected to ZYNQ 7000 AP SoC ZC 702
2 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
The AD-FMCOMMS5 transceiver is connected to the ZYNQ 7000 AP SoC ZC 702 FPGA board.
Does Matlab offer support for beamforming applications for this configuration, obviously using an antenna array ?
0 Commenti
Risposte (1)
UDAYA PEDDIRAJU
il 12 Giu 2024
Hi Tudor,
MATLAB can potentially work with your setup for beamforming applications, but it requires additional steps:
While MATLAB provides design tools, successful implementation involves extra effort for hardware interaction and potentially FPGA programming I hope this may guide you to achieve your requirement.
Vedere anche
Categorie
Scopri di più su Communications Toolbox in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!