HOW CAN I TURN AN EQUATION INTO COMPONENT IN A LIBRARY?
2 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
component CantileverBeamDeflection
% Define the nodes
nodes
P = foundation.mechanical.translational.translational; % Translational node P
C = foundation.mechanical.translational.translational; % Translational node C
end
% Define the parameters
parameters
L = {1, 'm'}; % Length of the beam
E = {210e9, 'Pa'}; % Young's modulus
I = {1e-6, 'm^4'}; % Second moment of area
w = {100, 'N/m'}; % Uniform load per unit length
x = {0.5, 'm'}; % Distance from the fixed end
end
% Define the variables
variables
delta = {0, 'm'}; % Deflection
end
% Define the equations
equations
% Deflection equation for a fixed-free beam under uniform load
delta == (w*x^2)/(24*E*I) * (L^3 - 2*L*x + x^2);
% Force equilibrium at nodes
P.f == -w * x;
C.f == w * x;
end
end
0 Commenti
Risposte (2)
Yifeng Tang
il 11 Giu 2024
Hi Usha,
In addition to Ayush's answer, I suggest that you look at the source code of a translational spring block. You custom block seems to missing equations between port velocities (across variable) and internal displacement (delta). The equations for the force (P.f and C.f) seem a bit problematic as well to me. Usually the force is the difference between those at the port. What you have seems to assume one end is fixed to the ground. I understand it's usually how a beam works, but defining the equations with such assumptions (in your mind) may confuse Simscape :p
0 Commenti
Ayush Aniket
il 11 Giu 2024
Hi Usha,
To turn an equation into a component in a library in Simulink, follow the below steps:
- Save the Simscape file ( .ssc) with the component defnintion (as mentioned above in the question) in a directory that's on your MATLAB path. You should defind the component's physical nodes, parameters, variables, and equations within the file. Follow the guidelines as given here: https://www.mathworks.com/help/simscape/lang/creating-custom-components.html#brnos_c-4
- The next step is to organise your component file in namespace folders. You should save the file inside a folder on the MATLAB path and the name of the folder should start with a '+' character for e.g. '+MyComponents'.
- The last step is to build the library to make your component available in Simulink. You can do this by using the ssc_build function. For example, if your component is saved in a directory named '+MyComponents', you would call ssc_build MyComponents.
Refer to the following documentation link to read in detail about the steps: https://www.mathworks.com/help/simscape/lang/building-custom-block-libraries-from-simscape-component-files.html
0 Commenti
Vedere anche
Categorie
Scopri di più su Simulation and Analysis in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!