Set Data Type of Inport Block

Hi,

I want to set the data type of an inport Block with specification (Type:Num between[Min Max[). but I don't find a way to do it. Thank you for the help.

Nedra.

Answer 1

[Nobel Mondal]

You can double click on the block and change the following values:

[Nobel Mondal]

Also you can set it from the command prompt like this -

>> set_param('myModel/In1', 'OutDataTypeStr', 'double',...
            'OutMin', '0.00', 'OutMax', '100.0');

[Nedra Ebdelli]

Thank you.

[Nedra Ebdelli]

Please can you help me with this question how can I differentiate the bounded interval and the non bounded interval for example [Min Max] and [Min..Max[.

Nedra.

It is possible With this Min and Max.

[Sebastian Castro]

From another one of your questions, I noticed that you are using Simulink Design Verifier. Wanted to let you know that the Min and Max specifications in the Inport block

1. Do not limit the signal value in any way -- you want to use a Saturation block if you need to physically limit values.
2. Are not used by Simulink Design Verifier for analysis. If you want to specify bounded vs. unbounded ranges, use Proof Assumption, Proof Objective, Test Condition , or Test Objective block (depending on whether you're doing property proving or test generation).

- Sebastian