How to create this transfer function Block?
1 visualizzazione (ultimi 30 giorni)
Mostra commenti meno recenti
Siripot Ruglheck
il 17 Ago 2015
Modificato: Sebastian Castro
il 17 Ago 2015
I have a problems about How to create the transfer function block same in picture (I attached in this topic) by use simulink.
Thank you.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/148155/image.jpeg)
0 Commenti
Risposta accettata
Sebastian Castro
il 17 Ago 2015
Modificato: Sebastian Castro
il 17 Ago 2015
Ah, good old ramp tracking filters...
If you have the Control System Toolbox, you can use an LTI System block and enter the following in the block dialog:
( tf([T8 1],1) / (tf([T9 1],1))^M )^N
Otherwise, if you do not have access to the toolbox and the built-in transfer function objects, you can use a regular Simulink Transfer Fcn block. The numerator and denominator can be found using the conv function, though this will be a little tougher to figure out.
- Sebastian
0 Commenti
Più risposte (1)
Siripot Ruglheck
il 17 Ago 2015
Modificato: Siripot Ruglheck
il 17 Ago 2015
1 Commento
Sebastian Castro
il 17 Ago 2015
Oops, good catch. I totally messed that up :)
Corrected my post so others seeing this don't copy the wrong thing too.
Vedere anche
Categorie
Scopri di più su Measurements and Statistics in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!