How to plot multidimensional array with three variable

Hello,

My function is ratio=ratio(x,y,z) And ratio is multidimensional array as a 4x4x4

val(:,:,1) =

    0.0378    0.0642    0.0824    0.0973
    0.0480    0.0770    0.0980    0.1142
    0.0541    0.0845    0.1068    0.1236
    0.0574    0.0899    0.1128    0.1311

val(:,:,2) =

    0.0392    0.0750    0.1041    0.1277
    0.0520    0.0953    0.1277    0.1541
    0.0601    0.1068    0.1412    0.1689
    0.0655    0.1142    0.1500    0.1791

val(:,:,3) =

    0.0392    0.0770    0.1122    0.1426
    0.0520    0.1014    0.1426    0.1764
    0.0608    0.1155    0.1595    0.1953
    0.0669    0.1257    0.1709    0.2081

val(:,:,4) =

    0.0392    0.0770    0.1155    0.1493
    0.0520    0.1034    0.1500    0.1899
    0.0608    0.1196    0.1703    0.2122
    0.0669    0.1304    0.1831    0.2270

And also x, y and z are (1x4) vectors. How can I plot contour map in a cubic system as can be seen in figure ?

Answer 1

[Walter Roberson]

slice() the data on the three planes corresponding to the outside of the data.

The Z labels in the diagram are inconsistent. To be consistent with the interior values, 0 on the Z axis would have to be at the center bottom (the "front bottom" corner) and 2Pi on the Z axis would have to be at the right bottom (the "back bottom" corner).

[yusuf]

These are my variables

ratio=ratio(x,y,z)

x=[0.1 0.2 0.3 0.4] y=[0.2 0.4 0.6 0.8] z=[0.05 0.1 0.15 0.2]

First of all , I tied scatter3 but I got only points, could not get the distribution.

xgv = 0.1:.1:0.4;
ygv = 0.2:.2:0.8;
zgv=0.05:0.05:0.2;
[x, y, z] = meshgrid(xgv,ygv,zgv);

   scatter3(x(:),y(:),z(:),10,ratio(:),'filled');

colormap(jet);
colorbar;