TI C2000 LAUNCHXL-F28027F with Simulink error

I am trying to run the example 'Motor Control with TI LaunchPad' on TI F28027 LaunchPad (with a BIsolated XDS100 J-TAG Emulator)using Matlab2017a and CCSV5 I think I've setup the environment correctly

 1. CCSv5 (Code Composer Studio)
   Your version    : 5.5.0
   Required version: 5.0 or later
   Required for    : Code Generation
   TI_DIR="C:\ti\ccsv5"
2. CGT (Texas Instruments C2000 Code Generation Tools)
   Your version    : 6.2.0
   Required version: 5.2.1 to 6.0.2
   Required for    : Code generation
   C2000_CGT_INSTALLDIR="C:\ti\ccsv5\tools\compiler\c2000_6.2.0"
3. DSP/BIOS (Real Time Operating System)
   Your version    : 5.42.01.09
   Required version: 5.33.05 to 5.41.11.38
   Required for    : Code generation
   CCSV5_DSPBIOS_INSTALLDIR="C:\ti\bios_5_42_01_09"
4. XDC Tools (eXpress DSP Components)
   Your version    : 3.24.05.48
   Required version: 3.16.02.32 or later
   Required for    : Code generation
5. 2802x C/C++ Header Files
   Your version    : 2.20
   Required version: 2.20
   Required for    : Code generation
   DSP2802x_INSTALLDIR=""
6. Flash Tools (TMS320F2802x Piccolo(TM) Flash API)
   Your version    : 2.01
   Required version: 2.01
   Required for    : Flash Programming
   FLASH_2802X_API_INSTALLDIR="C:\ti\controlSUITE\libs\utilities\flash_api\2802x\v201"
  end

but I am facing the following error:

 ### Starting build procedure for model: c28027pmsmfoc_test
 Code Generation  3
Elapsed: 27 sec
### Generating code into build folder: C:\Windows\System32\c28027pmsmfoc_test_ert_rtw
### Invoking Target Language Compiler on c28027pmsmfoc_test.rtw
### Using System Target File: C:\Program Files\MATLAB\R2017a\rtw\c\ert\ert.tlc
### Loading TLC function libraries
Warning:  The data type "int8" uses a word size that is not available on the intended target.
    Fixed-point signals using this data type will be put inside a larger word or multi words.  When used,
extra software will be generated to force this larger word or multi words to emulate a smaller
word.  This emulation is helpful when your prototype target and your final
production target are not the same.  If the smaller word size does NOT exist
on the final production target, then consider increasing the word size to
one that is supported.
Warning:  The data type "uint8" uses a word size that is not available on the intended target.
.
Warning:  The data type "boolean" uses a word size that is not available on the intended target.
.
### Generating TLC interface API for custom data
### Initial pass through model to cache user defined code
### Caching model source code
### Writing source file c28027pmsmfoc_test.c
### Writing header file c28027pmsmfoc_test_private.h
### Writing header file c28027pmsmfoc_test.h
### Writing header file DSP28xx_SciUtil.h
.
### Writing source file DSP28xx_SciUtil.c
### Writing header file c28027pmsmfoc_test_types.h
### Writing header file rtwtypes.h
### Writing source file c28027pmsmfoc_test_data.c
### Writing header file rtmodel.h
.
### Writing source file ert_main.c
### TLC code generation complete.
.### Evaluating PostCodeGenCommand specified in the model
 Code Composer Studio Project  1
Elapsed: 0.784 sec
### Creating CCS Project at : C:\Windows\System32\c28027pmsmfoc_test_ert_rtw\CCS_Project
### CCS project created successfully Open project in Code Composer Studio.
### Using toolchain: Texas Instruments C2000 Code Generation Tools v5.2.12 | gmake (64-bit Windows)
### 'C:\Windows\System32\c28027pmsmfoc_test_ert_rtw\c28027pmsmfoc_test.mk' is up to date
### Building 'c28027pmsmfoc_test': "C:\PROGRA~1\MATLAB\R2017a\bin\win64\gmake"  -B -f c28027pmsmfoc_test.mk all
C:\Windows\System32\c28027pmsmfoc_test_ert_rtw>cd .
C:\Windows\System32\c28027pmsmfoc_test_ert_rtw>if "" == "" ("C:\PROGRA~1\MATLAB\R2017a\bin\win64\gmake"  -B -f c28027pmsmfoc_test.mk all )  else ("C:\PROGRA~1\MATLAB\R2017a\bin\win64\gmake"  -B -f c28027pmsmfoc_test.mk  )
*# # # # *gmake: c28027pmsmfoc_test.mk: No such file or directory**
gmake: *** No rule to make target `c28027pmsmfoc_test.mk'.  Stop.
C:\Windows\System32\c28027pmsmfoc_test_ert_rtw>echo The make command returned an error of 2
The make command returned an error of 2
C:\Windows\System32\c28027pmsmfoc_test_ert_rtw>An_error_occurred_during_the_call_to_make
'An_error_occurred_during_the_call_to_make' is not recognized as an internal or external command,
operable program or batch file.
### Creating HTML report file c28027pmsmfoc_test_codegen_rpt.html
### Build procedure for model: 'c28027pmsmfoc_test' aborted due to an error.
Error(s) encountered while building "c28027pmsmfoc_test":
### Failed to generate all binary outputs.
  end

Please, if anyone can help

Answer 1

[Sharan Paramasivam Murugesan]

I suspect this could be due to build folder being inside "C:\Windows\System32". Try moving the build folder to any other folder, say, C:\myproject. Refer to this blog for information about controlling the location of build folders

http://blogs.mathworks.com/simulink/2015/01/16/controlling-the-location-of-the-generated-code-and-temporary-files/