GUI interface with arduino

40 visualizzazioni (ultimi 30 giorni)
Tee
Tee il 24 Mar 2011
Commentato: Mohamed Asif il 6 Lug 2017
now, i try to control arduino board through Matlab GUI(using IO packages). First,i try to light on the LED by click on the push button i create, below is the callback function i put:
a=arduino('com3')
a.pinMode(10,'output');
a.digitalWrite(10,1);
after i try it, the LED only blink for a second, but now i wish to light on the LED continuously, what code should i type? I wish to light on and light off the LED using push button i create...anyone can help me, thanks..
  1 Commento
Mohamed Asif
Mohamed Asif il 6 Lug 2017
https://in.mathworks.com/videos/arduino-and-matlab-reading-inputs-and-writing-outputs-106502.html
use this above link you can get idea about it

Accedi per commentare.

Risposta accettata

Jarrod Rivituso
Jarrod Rivituso il 24 Mar 2011
Disclaimer - I've used Arduinos in the past, but never used the MATLAB Arduino package.
With that said, I'm not sure if this is your issue, but one thing to consider is whether you want your callback to reinitialize the Arduino pinmode every time.
It seems to me like you'd really want to set up the Arduino pin modes and COM ports in the GUI initialization, and then have your callback only perform the digitalWrite.
If using GUIDE, then you will find a GUI initialization function that you can use to do the initialization. Then, you can use the guidata function to add the Arduino object to the guidata. Something like...
a = arduino('com3');
a.pinMode(10,'output');
handles.a = a;
guidata(hObject, handles);
Then, you could use the handles structure again in your callback
handles.a.digitalWrite(10,ledValue)
Again, this is all assuming you are using GUIDE. If you aren't, then you probably know your GUI's initialization better than I do.
  3 Commenti
Jarrod Rivituso
Jarrod Rivituso il 25 Mar 2011
Hi Tee,
Are you placing that code in the OpeningFcn?
You may want to have a read through this documentation page, as it discusses data management within a GUI.
http://www.mathworks.com/help/techdoc/creating_guis/f5-998352.html
Other than that, I can't comment more without seeing your code.
Hope this helps!
-Jarrod
medo
medo il 28 Lug 2014
hi all .... please i need the correct arduinoIO because iam downloading it but it not woke >>> thanx to all

Accedi per commentare.

Più risposte (2)

Kaustubha Govind
Kaustubha Govind il 24 Mar 2011
You could try using a persistent variable to store that last state, and toggle that each time the callback is fired:
persistent ledValue
if isempty(ledValue)
ledValue = 0;
end
ledValue = ~ledValue; %toggle ledValue
a=arduino('com3');
a.pinMode(10,'output');
a.digitalWrite(10,ledValue);
  3 Commenti
Kaustubha Govind
Kaustubha Govind il 24 Mar 2011
Apparently digitalWrite doesn't like boolean values - you can make that:
a.digitalWrite(10,double(ledValue));
heisenberg
heisenberg il 18 Mar 2015
how to access serial pins in above program to send data?

Accedi per commentare.


hardik sanghvi
hardik sanghvi il 25 Nov 2015
How to make pause and counter button code

Categorie

Scopri di più su MATLAB Support Package for Arduino Hardware in Help Center e File Exchange

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by