# Mutual coupling in antenna array

5 visualizzazioni (ultimi 30 giorni)
Tony Carl il 18 Dic 2018
Hi all,
I'm trying to get the voltage distribution of the entire antenna array under specific excitation pattern when mutual coupling is taken into account.
However, I'm not sure about the results I've got from my program, below are the steps and results:
(1)Array geometry and working condition
1 transmit (top-left corner) and 3 receive elements arranged rectangular, spacing 0.5 * lambda in x/y direction;
terminated by 50ohm resisters(Default);
backed by infinitive ground;
only the transmit element is excited at 1V;
c = physconst('lightspeed');
fc = 24e9;
lambda = c/fc;
dx = 0.5 * lambda;
dy = 0.5 * lambda;
dz = 0.25 * lambda;
len = 0.495 * lambda;
width = cylinder2strip(lambda / 160);
Voltage_map = [1 0 0 0];
mydipole = dipole;
mydipole.Length = len;
mydipole.Width = width;
mydipole.Tilt = [90 90];
mydipole.TiltAxis = [0 1 0; 0 0 1];
myelement = reflector;
myelement.Exciter = mydipole;
myelement.GroundPlaneLength = inf;
myelement.Spacing = dz;
myarray = rectangularArray;
myarray.Element = myelement;
myarray.RowSpacing = dy;
myarray.ColumnSpacing = dx;
myarray.AmplitudeTaper = Voltage_map;
show(myarray);
(2)Voltage distribution derivation
Vo = Sparameters * Vin;
S = sparameters(myarray, fc);
Voltage = S.Parameters * Voltage_map';
(3)results
0.467586377317679 + 0.187044014975194i
0.201363968041588 - 0.122844419394166i
-0.0685242315036429 - 0.106783300795153i
-0.0190084411346258 + 0.0534820400032710i
However, the reults seems weird...and I'm not sure about the process is right or not.
##### 0 CommentiMostra -2 commenti meno recentiNascondi -2 commenti meno recenti

Accedi per commentare.

### Categorie

Scopri di più su Antenna and Array Analysis in Help Center e File Exchange

### Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by