Info
Questa domanda è chiusa. Riaprila per modificarla o per rispondere.
How can I simulate the rotional speed continuously ?
1 visualizzazione (ultimi 30 giorni)
Mostra commenti meno recenti
hi, I simulated a DC motor with the help of Simscape and determined the RPM with the help of an encoder. The encoder generates 4 pulses per rev. For decoding I counted the falling edges of Port A with Counter UP and the counter is reset to zero every second (time interval) using Pulse Generation. The number of pulses per second is divided by 4 (4 pulses per rev) and multiplied by * 60 (from sec to minute). How could I simulate the rotional speed (RPM) continuously ? so that the RPM always stays at the same value, as long as the voltage is not changed. Because every second it is reset to zero (see RPM image) if I do not set the counter to zero every second then it will continue to count.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/201697/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/201698/image.png)
0 Commenti
Risposte (0)
Questa domanda è chiusa.
Vedere anche
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!