How do I plot 'standing wave(modal) solution' ?
2 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Dilan Kilic
il 21 Mar 2020
Commentato: Dilan Kilic
il 21 Mar 2020
Hi everyone, i am studying structural dynamics. I want to create modal wave shape solution, but i can't. x-axis should be (x/l) and y-axis should be (modeshape).
clear,clc
x=0:0.2:1;
l=0:0.2:1;
i=1:.001:10;
modeshape=sin(i*pi*(x/l));
plot(x/l,modeshape)
The modeshape formula
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/278489/image.png)
and the graphs that i want to plot
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/278490/image.png)
thanks a lot:)
0 Commenti
Risposta accettata
Sriram Tadavarty
il 21 Mar 2020
Hi Dilan,
You made a good try. Here are some suggestions, as the plot indicate for a ratio of x/l, you could make only one of them vary and make sure you get the limits for the axis. Then, there are different plots for different i., implies all of them are not together. So, here are some modifications that can be made
clear,clc
x=0:0.02:1; % Pass x from 0 to 1 at steps of 0.02
l=1; % Set l to 1
i=1:2; %1:.001:10; % Update with range of mode shape functions that are required
for index = 1:length(i)
figure
modeshape=sin(i(index).*pi.*(x./l));
plot(x/l,modeshape)
title(['Mode Shape ' num2str(i(index)) ])
end
% each mode shape is plotted in a different figure
Hope this helps.
Regards,
Sriram
Più risposte (0)
Vedere anche
Categorie
Scopri di più su 2-D and 3-D Plots in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!