Problem in matlab implementation zero crossings detector

Hi guys!

I have Ac singal it's implicitly vector sized as 1X32000 samples (vector that its values are samples). and if I do plot in matlab then I get signal like sinusoidal signal

Im trying to do zero crossing in matlab in order to detect where I have edges in my input signal (ac sampled signal-vector of samples) ! , I must do in matlab code the zero crossings by interpolation methods -if you see the photo that I attached it's the red dots .. - and I want afterwards to subtract between each adjacent two red dots of zero crossings dots and find the time between those every two red dots (in my photo down for instance the subtraction between two red dots-two point of zero crossings- are 5sec .. at the end of my signal the difference between the two last point of zero crossings are 10sec) .. so I need to calculate the difference between every two adjacent zero crossings points, afterwards to find the value (in other words it's y value-amplitude value of time(x axis)) of the middle of every two adjacent zero crossings point - see please the photo down I drew blue line at every middle of two zero crossings- , then I take the amplitude of every middle of every two adjacent zero crossings point and make those condition:

if (amplitude of the middle of two adjacent crossing point >0 ) => 1 , I save that 1 in another array correspondly .

if (amplitude of the middle of two adjacent crossing point <0 ) => 0 , I save that 0 in another array correspondly .

in my example that Im attaching in my photo down I would get at the end this output : 0101 .

more clarification about my example, here the output is 0101 and here's the explanation why it's 0101 :

first the median of two first adjacent zero crossing is negtive (where there's blue line in first envelop ..amplitude is negative) so in another array or string I save 0.

second median of two second adjacent zero crossing is positive (where there's blue line in second envelop ..amplitude is positive ) so in another array or string I save 1.

etc ....

Could anyone please help me how can I do that in matlab? I really stuck in this about two weeks, I tried by myself many attempts and I didn't succeed to get the required outputs..thanks for any help!!!!!

just noting that the output could be array or concanating string that I save to it the value 0/1 that's result of conditions ..

Appreciated for any help /assistance!

Attaching down my signal (sampled signal= vector of samples).

[Rafael Hernandez-Walls]

You can deal with this code

https://la.mathworks.com/matlabcentral/fileexchange/37653-mzerocross

[Mohamed Jamal]

Hi Rafael, it's not what Im looking for, should I re-explain my question maybe?

[Mohamed Jamal]

Any help guys? thanks

[Star Strider]

This is a continuation of the similar (apparently now abandoned) thread: zero crossings with interpolation

[Mohamed Jamal]

I understand you and totally with you but Im not succeeding to make the differences between every two zero crossings and here's my problem not succeeding to make the intergregation.

[Mohamed Jamal]

here the problem isn't finding the zero crossings, here is to find the difference(subtraction) between every two adjacent zero crossings and to take the middle of them and check the amplitude between in order to see if it's positive or negative

[Mohamed Jamal]

Anyway I would thank you if you could help me in this, appreciated.