![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/352985/image.png)
the scope doesn't show the correct signal
5 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Cristian David Navarro Suárez
il 27 Ago 2020
Risposto: Vasco Lenzi
il 28 Ago 2020
i'm trying to simulate a simple AC circuit in simulink, i put a sinusoidal signal in a AC voltage source with 50V peak, and a resistance of 10 ohms in serie with the voltage source, that's all the circuit, when i measure the voltage using the scope it works and i see the correct waveform, but when i look for the current using the scope i don't see anything, (i am measuring the current in serie with the resistence and the voltage source)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/352625/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/352628/image.png)
0 Commenti
Risposta accettata
Vasco Lenzi
il 28 Ago 2020
Hi Cristian
you modeled the circuit as open. Putting a voltage sensor there won't close the circuit to allow current to flow. So the result are correct. You need to properly close the circuit and place the sensor appropriately:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/352985/image.png)
see this shipping example as well:
>>power_acvoltage
0 Commenti
Più risposte (0)
Vedere anche
Categorie
Scopri di più su Electrical Sensors in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!