Fail to Retrieve channel description
3 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Serial.println("AT");
delay(1000);
Serial.print("AT+CIPSTART=3,\"TCP\",\"api.thingspeak.com\",80\r\n");
delay(3000);
Serial.print("AT+CIPSEND=3,");
Serial.print(68);
Serial.print("\r\n");
delay(2000);
Serial.print("GET /channels/");
Serial.print(channel_id);
Serial.print("/feeds.json?api_key=");
Serial.print(mystringchar);
Serial.print("&results=0 HTTP/1.1\r\n");
Serial.print("Host:");
Serial.print(DST_IP);
Serial.println(); //web link
delay(300);
unsigned long lastRead = millis();
while (millis() - lastRead < 5000) {
while (Serial.available())
{
if (Serial.find("description\":\""))
{
String message = Serial.readStringUntil('$');
Serial.flush();
Serial.println(message);
}
}
This code was working fine for our production since 3 years but presently we are unable to retrive description .please do suggest us .
we are using sim-800c and esp8266-12f
0 Commenti
Risposte (2)
Vinod
il 28 Set 2020
Have you checked your GSM module to see that it still has data capacity? Nothing has changed on ThingSpeak early August that can be linked to what you are seeing.
Are you able to connect to any other site using the SIM-800C?
4 Commenti
Vinod
il 8 Ott 2020
Since the response is correct from POSTMAN and cURL, I suspect the issue is on your device code. I have pasted the Arduino sketch in my answer below that you can modify and try on your device.
Vinod
il 5 Ott 2020
Modificato: Vinod
il 5 Ott 2020
Here's a working Arduino Sketch I have tried on an ESP32. It can be modified as needed for your device.
#include <WiFi.h>
const char* ssid = "YourSSIDHere";
const char* password = "YourWifiPasswordHere";
WiFiClient client;
const char* host = "api.thingspeak.com";
void setup() {
Serial.begin(115200);
delay(100);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");
}
void loop() {
delay(5000);
if (!client.connect(host, 80)) {
Serial.println("connection failed");
return;
}
String url = "/channels/366768/feeds.json?api_key=DoesNotMatter&results=0&headers=false";
Serial.print("Requesting URL: ");
Serial.println(url);
client.print(String("GET ") + url + " HTTP/1.1\r\n" +
"Host: " + host + "\r\n" +
"Connection: close\r\n\r\n");
delay(500);
while(client.available()){
String line = client.readStringUntil('{');
line = client.readStringUntil('}');
Serial.print(line);
while(client.available()){client.readStringUntil('\r');}
Serial.print("\r\n");
}
delay(10000);
}
2 Commenti
Vinod
il 15 Ott 2020
Modificato: Vinod
il 15 Ott 2020
If existing devices are working fine but new production devices are not, I would suggest looking at what might be different on the new devices. It could be that one of the libraries you use has changed, or something about the hardware (available memory, memory partitions, etc.?) has changed causing you to see different results.
Community
Più risposte nel ThingSpeak Community
Vedere anche
Categorie
Scopri di più su Write Data to Channel in Help Center e File Exchange
Prodotti
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!