how to read a .txt file in matlab ?

7 visualizzazioni (ultimi 30 giorni)
preet il 4 Lug 2013
i want to read a file name is imData.txt which has 9600 arbitrary float numbers. and store in array of size 80*120 after read i want show image of that array??
  6 Commenti
preet il 6 Lug 2013
walter there 120 float values in a row.and total 80 rows. 2nd location is (1,2).
every value delimited by space dear. min value is 0.000000 and max is 619.420000
preet il 6 Lug 2013
@walter , values are in double or say float . but image in MATLAB will shown after conversion in uint8 wt should i do?

Accedi per commentare.

Risposta accettata

Walter Roberson
Walter Roberson il 6 Lug 2013
For data in that format, load() should work, as would textscan(). You would not need to reshape() the data after either of those.
image() and imagesc() do not convert to uint8. However, when image() is passed floating point data (instead of uint8 or uint16) then image will expect the data to be in the range of 0 to 1, whereas imagesc() would rescale the floating point values so that the minimum mapped to 0 and the maximum mapped to 1.
What you should do about the fact your data ranges from 0 to 619 depends on your purposes. Are you okay with the loss of resolution if you rescale to 0 to 255? If so then
scaleddata = uint8(YourData ./ max(YourData(:)) .* 255);
Or you could leave the data in floating point format if you do not specifically need it to be uint8()
scaleddata = YourData ./ max(YourData(:);
The above assumes that for each file, the maximum value of the file should be treated as being full brightness. If there is some other value that should be treated as maximum brightness (e.g., 640) then use that value in place of max(YourData(:))

Più risposte (2)

Sivakumaran Chandrasekaran
use textread command
  3 Commenti
Jan il 5 Lug 2013
@kp: Then please show what you have tried and explain the problem. Currently too much guessing is required to give an answer.
preet il 6 Lug 2013
@ jan please read my previous comment after walter's comment, for explanation.

Accedi per commentare.

Hugo il 6 Lug 2013
Suppose that your file is called data.txt You can load the data simply with
which will create a variable called "data"
and the print it using
  4 Commenti
preet il 6 Lug 2013
but my values are in double but images will be shown after convrt in uint8 so wts the solution?
Hugo il 6 Lug 2013
If I understood right, you said that the values are in matrix form in the file. That should mean that your file is structures as lines ending in a newline symbol, and each number in each line is separated by a space. If that's the case, no matter whether the numbers are integer or real, load(...) will give you a matrix with as many rows as lines in the file and as many columns as numbers in the line, provided the number of numbers is the same in each line.
Once this is solve, I don't know what your values represent. If the position in the matrix represents the position of the pixels and the value represents the colour, then image(...) should show the image. Otherwise, I think it's up to you what you really have and how you really want to represent it.
I hope this helps you. Good luck.

Accedi per commentare.


Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by