How to set stopping criteria in mixed integer programming?
4 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Hi guys~
Recently, I am using mixed integer programming to solve a problem.
Actually, I want to let it stop when Relative gap is less than 2%.
So I set according to https://www.mathworks.com/help/optim/ug/intlinprog.html#btv2x05
options = optimoptions(@intlinprog,'RelativeGapTolerance',0.2,'Display','iter')
[x,fval]=intlinprog(f,iint,A,b,[],[],lb,ub,[],options);
Yet, it seems like this setting doesn't work. It have been running for 30min...
Any suggetions? Thank you very much!
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/621378/image.jpeg)
1 Commento
Derya
il 20 Mag 2021
I assume 'RelativeGapTolerance',0.02, for the output underneath the setting of options.
Risposta accettata
Derya
il 20 Mag 2021
Hello Frank,
The stopping tolerance is automatically modified to
tolerance = min(1/(1+|L|), RelativeGapTolerance)
As described in https://www.mathworks.com/help/optim/ug/intlinprog.html#btv2x05.
I estimate the lower bound, L, for your problem at around 96, so intlinprog tolerance for stopping on relative gap would be around 0.01, i.e. 1%. It looks like intlinprog cannot reduce the gap from 1.54% in the following 30 minutes.
You have couple of options:
- Increase AbsoluteGapTolerance, e.g. to 2.
- Divide the objective function by a factor 2 or more, perhaps 10.
- Set CutGeneration and/or Heuristics to 'intermediate' and see if this reduces the time to solution.
Kind Regards,
Derya
Più risposte (0)
Vedere anche
Categorie
Scopri di più su Get Started with Optimization Toolbox in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!