Optimisation problem in matlab
Mostra commenti meno recenti
Hello guys,
So I have this scatte plot in the form of a measured impedance according to frequency Z(f), and I have an RL ladder circuit seen in the following figure
.I need some help in writing an optimisation problem that will allow me to get the values of the parameters R_i L_i that will eventually give an equivalent impedance of the RL ladder similar to the one measured- Z(f) -.
Thanks in advance.
Wallflower
2 Commenti
Rik
il 21 Giu 2021
This looks like a homework assignment. You can find guidelines for posting homework on this forum here. If you have trouble with Matlab basics you may consider doing the Onramp tutorial (which is provided for free by Mathworks). If your main issue is with understanding the underlying concept, you may consider re-reading the material you teacher provided and ask them for further clarification.
wallflower
il 21 Giu 2021
Risposte (1)
Sergey Kasyanov
il 21 Giu 2021
Modificato: Torsten
il 12 Lug 2022
Hello!
Try that:
% tune only next 2 lines
L = 5;% steps in ladder
Z_max = 1e2;% max Z for one R or Xl
% goal Z(w)
% w0 - array with measured angular frequences
% Z0 - array with measured impedances
% R0 - Rs_1.txt
% L0 - 2*Self_Energy_1.txt
w0 = (2.*pi.*[[1e-3,50,500],1e3:2e3:500e3])';
% Start inserted to make code work
R0 = rand(size(w0));
L0 = rand(size(w0));
% End inserted to make code work
Z0 = R0(:,1) + 1i*w0.*L0(:,1);
w0 = reshape(w0, 1, []);
Z0 = reshape(Z0, 1, []);
%% calculate z(w) for ladder
R = sym('R', [1,L+1]);
L = sym('L', [1,length(R)]);
w = sym('w');
par = @(a, b) 1/(1/a + 1/b);
h1 = @(a, i) R(i) + par(a, 1i*w*L(i));
Z = R(end);
for i = (length(R)-1):-1:1
Z = h1(Z, i);
end
% get lambda function for optimization
fun1 = matlabFunction(Z);
% do not look at that code
s = 'fun2 = @(vals, w) fun1(';
for i = 1:(length(R)*2 - 1)
s = [s, sprintf('vals(%i), ', i)];
end
s = [s, 'w);'];
eval(s);
% create optimization function
fun3 = @(vals) sum(abs(fun2(vals, w0) - Z0).^2);
% number of variables
N = length(symvar(Z)) - 1;
%the better way is to use more powerfull algorithms such as genetic algoritms which can stands
%against a huge amount of local min. There are a lot of algorithms that
%realized in matlab toolboxes. Try!
options = optimoptions('ga', 'Display', 'iter', 'PopulationSize', N*200, 'MaxGenerations', N*200);
res = ga(fun3, N, [], [], [], [], zeros(1, N), Z_max*[ones(1,floor(N/2))/2/pi, ones(1, ceil(N/2))], [], options);
% first floor(N/2) of res - L(1), L(2), ...
% last ceil(N/2) of res - R(1), R(2), ...
%plot results
figure;plot(w0, abs(Z0), w0, abs(fun2(res,w0)));
figure;plot(w0, angle(Z0), w0, angle(fun2(res,w0)));
14 Commenti
wallflower
il 21 Giu 2021
Sergey Kasyanov
il 21 Giu 2021
sorry, use fmincon instead:
res = fmincon(fun,rand(1,N),[],[],[],[],zeros(1,N),9e9*ones(1,N),[],options);
wallflower
il 21 Giu 2021
Sergey Kasyanov
il 22 Giu 2021
What is about ga()?
wallflower
il 22 Giu 2021
For the ga() this is the result I get :'(
Sergey Kasyanov
il 22 Giu 2021
Can you load Z(f) here as .mat file?
wallflower
il 22 Giu 2021
Sergey Kasyanov
il 24 Giu 2021
Are Z(f) pure resistance? That means that it does not depend on frequency, so problem is not correct.
I corrected code in answer.
wallflower
il 24 Giu 2021
Sergey Kasyanov
il 24 Giu 2021
I corrected code. There were some misprints.
Now it is working, but It is very sensitive to limits of Z_max and amount of ladder steps. Try, please. Does it working on your machine?
Anes MESSADI
il 12 Lug 2022
I tried to use the code you proposed but it doesn't work, can you please share the corrected one.
Thank you,
Sergey Kasyanov
il 12 Lug 2022
I can't test and correct code at the moment. What error is there?
Anes MESSADI
il 12 Lug 2022
there are no errors, it works, but the fitting is not good, I used only the Rs_1.txt and Self_Energy_1.txt just to test the code.
Thank you for your help
Sergey Kasyanov
il 13 Lug 2022
Try to use that code with your w0 and Z0. Also you need function ladder_z in the file.
% tune only next 2 lines
L = 10;% steps in ladder
Z_max = 1e2;% max Z for one R or Xl
% w0 - array with measured angular frequences
% Z0 - array with measured impedances
% create data for testing
w0 = 2 * pi * logspace(-3, 2, 10);
z0 = [rand(1, L);rand(1, L)];
Z0 = [];
for i = 1:length(w0)
Z0(i) = ladder_z(z0(1, :) + z0(2, :) * 1i * w0(i));
end
% main code
h1 = @(vals, w) ladder_z(vals(1:fix(length(vals) / 2)) + 1i * w * vals(fix(length(vals) / 2) + 1:end));
h2 = @(vals) arrayfun(@(iw) h1(vals, iw), w0);
f = @(vals) sum(abs(h2(vals) - Z0).^2);
options = optimoptions('ga', 'Display', 'iter', 'PopulationSize', L*200, 'MaxGenerations', L*200, 'UseParallel', true);
res = ga(f, L * 2, [], [], [], [], zeros(1, 2 * L), Z_max*[ones(1, L), ones(1, L) / 2 / pi], [], options);
% check
figure;plot(w0, abs(Z0), w0, abs(h2(res)));
Categorie
Scopri di più su Ladder Diagram Integration in Centro assistenza e File Exchange
il 21 Giu 2021
il 13 Lug 2022
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
