Generate a specified number of pulse signals using NI USB-6211
3 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Hello all,
I need to generate a specified number of pulse signals using NI USB6211 and MATLAB daq toolbox. For example, 60 pulses are in need in about 1min of time. I'm now using code as follow. I use
DurationInSeconds
ch.Frequency
to control the number of pulse. But if the Frequency is high and Time is long, the number of pulse may not agree with my expect.
Can I generate a specified number of pulse signals with Counter output port in USB-6211 directly with MATLAB code?
I need precise control of number of the counter pulse and not too care about the time of pulse train.
test = daq.createSession('ni');
ch=addCounterOutputChannel(test,Device_ID,'ctr0','PulseGeneration');
ch.Frequency=1; % Palse per second
test.DurationInSeconds=60;
Thanks for your help.
0 Commenti
Risposte (1)
Brahmadev
il 17 Mag 2024
You can refer to the following example to generate a pulse signal for generating pulse signals with NI devices:
Hope this helps!
0 Commenti
Vedere anche
Categorie
Scopri di più su 波形生成 in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!