qpsk in rayleigh channel simulation changes everytime you simulate
4 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
plot of ber vs enno for qpsk in rayleigh channel using the object rayleighchan changes for each simulation.why is this happening?my code is as follows: % Create Rayleigh fading channel object. chan = rayleighchan(1/10000,0);
% Generate data and apply fading channel. M = 4; % QPSK modulation order hMod = modem.pskmod('M', M,'InputType','bit'); % Create a QPSK modulator hDemod =modem.pskdemod('M',M,'OutputType','bit','DecisionType','hard decision'); % Create a QPSK demodulator % using the modulator tx = randsrc(50000,1,[0 1]); % Generate a random bit stream dpskSig = modulate(hMod, tx); % QPSK modulate the signal fadedSig = filter(chan,dpskSig); % Apply the channel effects
% Compute error rate for different values of SNR. SNR = 0:2:40; % Range of SNR values, in dB. numSNR = length(SNR); BER = zeros(1, numSNR); for n = 1:numSNR rxSig = awgn(fadedSig,SNR(n)); % Add Gaussian noise rx = demodulate(hDemod, rxSig); % Demodulate % Compute error rate. [nErrors, BER(n)] = biterr(tx,rx); end
% Plot BER results. semilogy(SNR,BER,'r*'); legend('Empirical BER'); xlabel('SNR (dB)'); ylabel('BER'); title('Binary QPSK over Rayleigh Fading Channel');
3 Commenti
Risposte (0)
Vedere anche
Categorie
Scopri di più su Propagation and Channel Models in Help Center e File Exchange
Prodotti
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!