Grid-Connected PV Array

Versione 1.2.0.0 (439 KB) da Pierre Giroux
Two demonstrations of a grid-connected PV array using SimPowerSystems.
4.6
(89)
62,8K download
Aggiornato 9 ott 2012

Visualizza la licenza

The following two models are included in the package:

• PVarray_Grid_IncCondReg_det.mdl is a detailed model of a 100-kW array connected to a 25-kV grid via a DC-DC boost converter and a three-phase three-level Voltage Source Converter (VSC). Maximum Power Point Tracking (MPPT) is implemented in the boost converter by means of a Simulink model using the “Incremental Conductance + Integral Regulator” technique.

• PVarray_Grid_PandO_avg.mdl is an average model of a 200-kW array connected to a 25-kV grid via two DC-DC boost converters and a single three-phase VSC. The MPPT controller based on the “Perturb and Observe” technique is implemented by means of a MATLAB Function block that generates embeddable C code.

A Help file containing useful information on the two models is also included.

Authors: Pierre Giroux, Gilbert Sybille, Hydro-Quebec Research Institute (IREQ)
Carlos Osorio, Shripad Chandrachood, The Mathworks

Cita come

Pierre Giroux (2024). Grid-Connected PV Array (https://www.mathworks.com/matlabcentral/fileexchange/34752-grid-connected-pv-array), MATLAB Central File Exchange. Recuperato .

Compatibilità della release di MATLAB
Creato con R2011b
Compatibile con qualsiasi release
Compatibilità della piattaforma
Windows macOS Linux
Community
Ulteriori file sono disponibili nella  Power Electronics Control Community

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

PVarray/

Versione Pubblicato Note della release
1.2.0.0

The two PV array models (detailed and average) have been updated.
Diode characteristic inside the PV Array blocks is now correctly implemented as Id=Isat*[exp(Vd/Vt)-1].
Thanks to Subesh and Buvana for raising this problem.
1.1.0.0

Fixed figure name + modified tags
1.0.0.0