CAN Vendor

R2026b

Specify CAN vendor

Since R2026b

Model Configuration Pane: Hardware Implementation / Hardware board settings / Target hardware resources / Connectivity

Description

Specify CAN vendor for universal measurement and calibration protocol (XCP) over CAN through which the host computer communicates with the target hardware for external mode simulation.

Dependencies

To enable this parameter, set Communication interface to CAN and Connectivity interface parameter to CAN (MCANx). The value of x depends on the Device Series parameter value.

Settings

<empty> (default) | options vary depending on the CAN interface device connected

Ensure that you connect the CAN interface device to the hardware board before selecting a vendor. Click the Refresh button to view the available CAN vendor options. If no vendors appear, verify that the hardware drivers are installed correctly and that the hardware is compatible with your MATLAB^® and Simulink^® version.

CAN Device and CAN Channel parameter values will appear after you select a value for the CAN Vendor parameter. For example, the screenshot shows the configuration settings for Vector CAN interface device.

Select vendor specific CAN parameters in configuration parameters window

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2026b