Main Content

Activate Variant During Different Stages of Simulation and Code Generation Workflow

Using variant activation time, Simulink® sets active choices in variant blocks and variant parameters during different stages of simulation and code generation workflows.

The active choice is set:

  • During the model compile stage, or the simulation-loop stage of the simulation workflow.

  • During the model compile stage, the code compile stage, or the model startup stage of the code generation workflow.

See Stages to Set Active Choices in Variant Blocks and Variant Parameters.

To set the active choice, Simulink evaluates the variant controls that you specify in the workspace browser, at the command line, or in the callbacks, such as InitFcn, PreLoadFcn, and PostLoadFcn. For more information on callbacks, see Model Callbacks.

Setting the active choice at intermediate stages improves the speed of simulation and allows you to reuse the artifacts from the previous run in code generation workflows. It also enables you to analyze variant choices for incompatibilities, such as datatype and dimension mismatches, prior to simulation and code generation.

For example, the code that you generate with code compile activation time contains all the choices. Prior to the code compilation, you can specify the value of the variant control variable. Based on the value of the variant control variable, Simulink sets the active choice, and the code is conditionally compiled only for the active choice. You can reuse the same code every time you change the value of the variant control variable. The code conditionally compiles for the given active choice.

Similarly, the code that you generate with startup activation time also contains all the choices. Prior to running the executable of the code, you can specify the active choice by changing the value of the variant control variable. You can reuse the same executable every time you change the value of the variant control variable. The executable conditionally runs for the given active choice. Additionally, startup activation time enables you to skip recompilation and directly start simulating the model.

Note

Only one choice can be active any given stage of the simulation and code generation workflow.

Evaluation of variant controls for each activation time during different stages of simulation and code generation

Stages to Set Active Choices in Variant Blocks and Variant Parameters

These tables describe the stages at which Simulink sets the active choice of variant blocks and variant parameters during simulation and code generation workflow.

Stages of Simulation WorkflowDescriptionVariant Activation Time
model compileThis is the first stage of the simulation workflow. In this stage, the block parameter expressions and callback functions of the model are evaluated, signal attributes, sample time attributes, and block execution order is determined, and the block is optimized to improve the simulation speed.
simulation-loopSimulink successively computes the states and outputs of the system at intervals from the simulation start time to the finish time.startup

For more information on stages in the simulation workflow, see Simulation Phases in Dynamic Systems.

Stages of Code Generation WorkflowDescriptionVariant Activation Time
model compileThis is the first stage of the simulation workflow. In this stage, the block parameter expressions and callback functions of the model are evaluated, signal attributes, sample time attributes, and block execution order is determined, and the block is optimized to improve the simulation speed.
code compileThe C code is translated to machine code.code compile
model startupThis stage involves initializing variables, allocating memory, and configuring interfaces for simulation and code generation, ensuring proper initialization, and resource allocation before runtime.startup

Types of Variant Activation Time in Variant Blocks and Variant Parameters

Simulink sets the active choice of variant blocks and variant parameters during different stages of simulation and code generation workflow using these variant activation times:

update diagram

During simulation, Simulink sets and retains the active choice at the start of the model compilation stage before the signal attributes are propagated to the blocks. The inactive choices are removed from the simulation workflow. Signal attributes are then propagated only to the active choice, so only the active choice participates in the subsequent stages of simulation. The signal attributes are not analyzed for consistency across the model.

The code generation workflow is same as the simulation workflow. Since only active choices are retained and inactive choices are removed in the model compilation stage, the code that is generated in the code generation stage contains only the active choice.

For information on how to use the update diagram activation time in variant blocks and in variant parameters, see Variant activation time and ActivationTime.

update diagram analyze all choices

During simulation, Simulink propagates signal attributes to all variant choices. The signal attributes in the choices are analyzed to check if each block can accept the signals connected to its inputs. Simulink then sets and retains the active choice late in the model compilation stage. The inactive choices are removed from the simulation workflow, so only active choice participates in the subsequent stages of simulation.

The code generation workflow is same as the simulation workflow. Since only active choices are retained and inactive choices are removed in the model compilation stage, the code that is generated in the code generation stage contains only the active choice.

For information on how to use the update diagram analyze all choices activation time in variant blocks and in variant parameters, see Variant activation time and ActivationTime.

Note

Simulating and generating code for variant blocks with the variant activation time set to update diagram analyze all choices and that are connected to continuous state blocks is not supported.

code compile

The simulation workflow is same as update diagram analyze all choices.

During code generation, Simulink propagates signal attributes to all variant choices. The signal attributes in all the choices are analyzed to check if each block can accept the signals connected to its inputs. All the choices participate in the code generation stage of the workflow. Thus, the generated code includes all the choices. In the code, the choices are enclosed in the C preprocessor conditionals #if and #else.

Simulink sets the active choice only when you compile the code to generate an executable from it. In other words, when you compile the code, the compiler accepts the active choice as input. The compiler compiles the preprocessor conditionals for the active choice and generates an executable for only the active choice. This option does not require you to regenerate the code next time you specify a different active choice. You generate the code only once, and you can then specify a different active choice prior to code compile and build the executable for that active choice.

In code compile:

  • You must install Simulink Coder™ to generate code for only active choices in the model.

  • You must install Embedded Coder® to generate code for active and inactive choices in the model.

Note

Simulating and generating code for variant blocks with the variant activation time set to code compile and that are connected to continuous state blocks is not supported.

For information on how to use the code compile activation time in variant blocks and in variant parameters, see Variant activation time and Compile Code Conditionally for All Values of Variant Parameters with Same and Different Dimensions (Simulink Coder). For an example on generating code, see Compile Code Conditionally for Variations of Component Represented Using Variant Block (Simulink Coder).

startup

During simulation, Simulink propagates signal attributes to all variant choices. The signal attributes in all the choices are analyzed to check if each block can accept the signals connected to its inputs. Simulink then sets and retains the active choice and removes the inactive choices in the loop initialization phase of simulation-loop stage. Only the active choice participates in the simulation-loop stage. This option does not require you to compile the model next time you change the active choice. You compile the model only once, and you can then specify a different active choice prior to the simulation-loop stage and simulate the model. Simulink successively computes the states and outputs of the model for that active choice.

During code generation, Simulink propagates signal attributes to all the variants choices. The signal attributes in all the choices are analyzed to check if each block can accept the signals connected to its inputs. All the choices participate in the code generation stage of the workflow and hence, the generated code includes all the choices. In the code, the choices are enclosed in regular if conditions.

Simulink sets the active choice only when you run the executable that is built from the generated code. In other words, when you run the executable, the central processing unit accepts the active choice as input. The processor executes the if conditions for the active choice and generates the output for only the active choice. The advantage of using this option is that you are not required to regenerate the executable the next time you specify a different active choice. You generate the executable only once. You can then specify a different active choice prior to running the executable and then generate the output for that active choice.

In startup, you must install either Simulink Coder or Embedded Coder to generate code for active and inactive choices in the model.

This list highlights the key capabilities of startup variants. For a comprehensive list of all the capabilities of startup variants, see V-Model for System Development with Simulink Variants.

The following are currently not supported with startup variant activation time:

  • Blocks with Simscape™ physical connection ports.

  • The variant condition expression can contain only "==", "~=", "&&", "||" and "~" operators.

  • Simulink.Parameter with custom storage classes having const and macro types are not supported for ERT based code generation.

  • Variant conditions with mix of code compile and startup gets combined during variant activation during propagation. Variant condition propagation with mix of code compile (#if) and startup (if) is not supported. Whenever code compile and startup gets combined it results in update diagram error. For more information, see Considerations and Limitations for startup Variant Activation Time.

  • Multi-input variant source with ‘Output function call’ selected to merge function-call signals is not supported.

  • A Variant Subsystem block with startup activation time and more than one variant choice does not support function-call signals on its outports.

  • Variant Manager constraints are not validated when variant control variable values are changed as part of fast restart workflows for variant blocks with startup activation time. For information on constraints, see Define Constraints for Variant Configurations.

inherit from Simulink.VariantControl

The variant block inherits the activation time from its variant control variable of type Simulink.VariantControl. Inheriting the activation time from variant control variables help you switch variant elements such as blocks and parameters coherently. If a variant block has at least one variant control variable of type Simulink.VariantControl, then setting the activation time of the block to inherit from Simulink.VariantControl is recommended, so that the block inherits the activation time from the variant control variable.

Note

If a variant block has multiple variant control variables of type Simulink.VariantControl, then all those variables must have the same activation time.

For information on how to use the inherit from Simulink.VariantControl activation time in variant blocks, see Variant activation time. For an example, see Simulink.VariantControl Variables for Coherent Switching of Choices in Variant Blocks.

Illustration of Different Variant Activation Times

This figure shows the stages at which Simulink sets the active choice for different variant activation times.

Detailed view of setting active and inactive choices in variant blocks and in variant parameters during different stages of simulation and code generation for each activation time

Variant Activation Time for Variant Blocks

This section explains how to specify the variant activation time, the supported variant control modes, and the variant condition propagation for different activation times in variant blocks.

Use Variant Activation Time in Variant Blocks

This example explains how to specify active choice using variant activation time in variant blocks.

Consider this model. The Variant Subsystem VSS1 has two potential variants, Linear and Nonlinear. The variant condition expression associated with the Linear is V == 1. The variant condition expression associated with the Nonlinear is V == 2. On the dialog box of VSS1, the Variant activation time parameter is specified as code compile.

When you generate code from this model, the generated code contains all variant choices of VSS1. In the code, the choices are enclosed in the C preprocessor conditional statements #if and #elif. Before you compile the code to generate an executable, you can specify a value for V as an input to the compiler. Upon compiling the code, the compiler accepts the value of V to evaluate each preprocessor conditional statement. Based on the condition that evaluates to true, the compiler sets the active choice and then generates the executable only for the active choice. For example, if you provide the input to the compiler as 1, the executable contains only the Linear variant choice.

To generate an executable for Nonlinear variant choice, change the input value to compiler to 2 and recompile the generated code.

An example of how to set variant activation time in variant blocks

Supported Variant Activation Time in Variant Blocks

This section lists the variant activation time supported by each type of variant blocks:

  • Hierarchical variant blocks and inline variant blocks

  • Event-based variant blocks

    • Simulink Function— The block by default inherits the variant activation time from the corresponding Function Caller block. You can overwrite the inherited activation time to code compile or to update diagram by selecting or clearing the Generate preprocessor conditionals parameter on its block parameter dialog box, respectively.

    • Initialize Function, Reset Function, and Terminate Function— The variant activation time is by default set to update diagram. You can change it to code compile by selecting the Generate preprocessor conditionals parameter on its block parameter box.

This table lists the variant activation time supported by variant blocks in different control modes.

Variant activation time
Variant blocksVariant control modeupdate diagramupdate diagram analyze all choicescode compilestartup
Variant Subsystem, Variant Model, Variant Source, Variant Sinkexpression
labelxxx
sim codegen switchingxx
Variant Connector (Simscape), Manual Variant Source, Manual Variant Sinkexpressionxxx
labelnot supported
sim codegen switchingnot supported
Simulink Function, Initialize Function, Reset Function, and Terminate Functionexpressionx
labelnot supported
sim codegen switchingnot supported

Note

The operators that you can use to form a variant condition expression in variant blocks depend on its variant activation time. See Types of Operators in Variant Blocks for Different Activation Times.

Variant Condition Propagation for Different Activation Times in Variant Blocks

Variant condition propagation allows you to assign condition expressions outside the variant blocks to the connecting blocks to improve performance. When you propagate conditions outside the Variant block, the inactive choices do not run during simulation, which can improve performance, particularly in large models. The propagation of variant condition outside the variant block varies for different activation times. For information, see Propagate Variant Conditions to Define Variant Regions Outside Variant Subsystems to Promote Consistency and Reduce Errors.

Propagating conditions through cascading blocks results in compounding conditions. Simulink does not support compounding conditions from variant blocks with startup and code compile variant activation times. For more information, see Considerations and Limitations for startup Variant Activation Time.

Variant Activation Time in Variant Parameters

This section explains how to specify the variant activation time, and the supported variant control modes in variant parameters.

Use Variant Activation Time in Variant parameters

This example explains how to specify active choice using variant activation time in variant parameters.

Consider this model. The Gain parameter of the Gain block is a variant parameter with its value set to K. The variable K has two values: 3.5 and 8.5. The Variant activation time of K is specified as code compile using the Simulink.VariantControl. This setting means that you can specify the active choice before code compilation starts.

An example of how to set variant activation time in variant parameters

V = Simulink.VariantControl('Value', 1, 'ActivationTime', 'code compile')
K = Simulink.VariantVariable('Choices', {'V==1', 3.5, 'V==2', 8.5})

When you generate code from this model, the generated code contains both active and inactive choices of K. In the code, the choices are enclosed in the C preprocessor conditional statements #if and #elif. When you compile this code to generate an executable, the compiler accepts the value of V as input to evaluate each preprocessor conditional statement. Based on the condition that evaluates to true, the compiler sets the active choice and then generates the executable only for the active choice. For example, if you provide the input to the compiler as 1, the executable is built for K set to 3.5.

To generate an executable with K set to 8.5, change the input value to compiler to 2 and compile the generated code again. You do not need to regenerate the code to generate an executable for different variant values.

Supported Variant Activation Time in Variant Parameters

This table lists the variant activation times available for variant parameters.

Note

The operators that you can use to form a variant condition expression in variant parameters are listed in Types of Operators in Variant Parameters.

Variant control modeVariant activation time
 update diagramupdate diagram analyze all choicescode compilestartup
expression
labelnot supported
sim codegen switchingnot supported

Storage Classes for Different Variant Activation Times

When you specify a condition expression to determine the active choice, each variant control variable of the expression has a storage class associated with it. Use storage classes to control the appearance and placement of the variant control variables in the generated code. Storage classes also prevent the optimizations such as elimination of the storage for variant control variables in the generated code. For more information, see Choose Storage Class for Controlling Data Representation in Generated Code (Simulink Coder).

The variables used in the variant condition expressions must satisfy these criteria to generate code with Simulink Coder or Embedded Coder.

  • The variant control variables in variant condition expressions must have these storage classes.

  • If the activation time of a variant control variable is set to startup, then specifying its storage class to any of these is not supported:

    • Storage classes such as Define that generates macros in the code.

    • Storage classes such as Const that generates constant qualified variables in the code.

  • To use scalar MATLAB® variables as variant control variables in variant blocks without any storage class for code generation, select Tunable as the Default parameter behavior from the Model Settings under Code Generation > Optimization. This criteria is not applicable to AUTOSAR post build variants.

For an example on storage classes for variant control variables, see Use Simulink.Parameter Type of Variant Control Variables for Code Generation in Variant Blocks (Simulink Coder).

Related Topics