Azzera filtri
Azzera filtri

Thingspeak HTTP eror code: -210

14 visualizzazioni (ultimi 30 giorni)
Emir il 11 Mag 2024
Commentato: Emir il 14 Mag 2024
We have a project and we have this eror code. We can only send temprature but we need to send more data to thingspeak . We dont know what to do please help us.

Risposte (2)

Hassaan il 11 Mag 2024
Modificato: Hassaan il 11 Mag 2024
1. Check API Key and Channel ID
Ensure that the API Key and Channel ID used in your HTTP request are correct. An incorrect API Key or Channel ID can lead to failures in data transmission.
2. Data Formatting
The format of the data being sent must match what ThingSpeak expects. ThingSpeak requires data to be sent in a query string with field names as field1, field2, etc., depending on how many fields are set up in your channel.
Example format:
3. Connection Limits
ThingSpeak has a limit on the rate at which updates can be sent, which is once every 15 seconds for free accounts. If you exceed this rate, you will not be able to send more data until the time limit has expired.
4. Maximum Field Limit
ThingSpeak channels have a maximum of 8 fields. Ensure you are not trying to send data to more fields than your channel has configured.
5. Network Issues
Check your network connection. Sometimes, intermittent network issues or wrong network settings (like proxy configurations) can cause failed requests.
6. Content-Length Header
If you are sending data using POST method, ensure that the Content-Length header in your HTTP request correctly matches the length of the data you are sending.
7. Debugging the Request
Try to isolate the issue by sending a simple request with minimal fields and gradually add more data to see at which point it fails. This can help identify if a specific piece of data or format is causing the issue.
Ensure that your requests are correctly formatted, adhere to the API limits, and contain valid API credentials. Testing with simplified data can also help identify the source of the issue. If you provide more specific details about the request format and the actual code you are using, I can give more precise advice.
If you find the solution helpful and it resolves your issue, it would be greatly appreciated if you could accept the answer. Also, leaving an upvote and a comment are also wonderful ways to provide feedback.
It's important to note that the advice and code are based on limited information and meant for educational purposes. Users should verify and adapt the code to their specific needs, ensuring compatibility and adherence to ethical standards.
Professional Interests
  • Technical Services and Consulting
  • Embedded Systems | Firmware Developement | Simulations
  • Electrical and Electronics Engineering
Feel free to contact me.
  3 Commenti
Hassaan il 11 Mag 2024
@Emir Did you follow through my above recommendations.
Emir il 11 Mag 2024
Yes i did i can send temprature data very well but i cant send any other data i dont know why

Accedi per commentare.

Christopher Stapels
Christopher Stapels il 13 Mag 2024
Modificato: Christopher Stapels il 13 Mag 2024
You can send data to multiple fields in a single post by adding &fieldx=number to the end of the api call or the mqtt payload. Be sure to replace x with the field number of interest and 'number' with the data you wish to send.
I dont think there is an http error code 210, there is a response code that means 'sucessfully connected'. Perhaps you can provide more context around the error. What is happening in the code when you get that?
  1 Commento
Emir il 14 Mag 2024
We used another app to do our project but thank you for responding.

Accedi per commentare.


Più risposte nel  ThingSpeak Community


Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by