how to do rising and falling edge in single signal using signal builder..?
75 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Risposta accettata
Più risposte (1)
Shubham
il 30 Lug 2024 alle 18:40
Hi Vinay,
To create a signal with rising and falling edges using the Signal Editor in MATLAB, you can follow these steps:
1. Define the Time and Data Vectors
First, define the time and data vectors in MATLAB:
% Define time vector
time = [0, 1, 2, 3, 4, 5];
% Define data points for rising and falling edges
data = [0, 1, 1, 0, 0, 1];
2. Create a timeseries Object
Create a timeseries object using the defined vectors:
% Create a timeseries object
ts = timeseries(data, time);
3. Save the timeseries Object to a MAT File
Save the timeseries object to a MAT file, which can be imported into the Signal Editor:
% Save the timeseries object to a MAT file
save('my_signal.mat', 'ts');
4. Open the Signal Editor
Open the Signal Editor:
signalEditor
5. Import the timeseries Object in Signal Editor
In the Signal Editor, follow these steps to import the timeseries object:
- Open the Signal Editor:
- Run the signalEditor command in MATLAB to open the Signal Editor.
2. Import the MAT File:
- In the Signal Editor, go to File > Import.
- Select MAT-file as the import source.
- Browse to the location where you saved my_signal.mat and select it.
- Follow the prompts to import the timeseries object.
3. Visualize and Edit the Signal:
- Once imported, you should see the signal in the Signal Editor.
- You can now visualize and edit the signal as needed.
Here is the screenshot obtained by running the above mentioned code:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1743406/image.png)
Vedere anche
Categorie
Scopri di più su Create Signal Data for Simulation in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!