Introduce Zybo board in Simulink HDL coder workflow advisor

Hello,

I am trying to use the Zybo platform within the HDL Coder workflow advisor but I am having some problems.

I created the reference design in Vivado 15.1 as it is specified in the tutorial http://www.mathworks.com/help/hdlcoder/examples/define-and-register-custom-board-and-reference-design-for-soc-workflow.html but in 15.1 and not in 14.2.

I saved the files for the custom board in C:\Program Files\MATLAB\R2014b\toolbox\hdlcoder\hdlcoderdemos\customboards\ZYBO. files are attached

Then in the Matlab command window, I type…

addpath(fullfile('C:\Program Files\MATLAB\R2014b','toolbox','hdlcoder','hdlcoderdemos','customboards','ZYBO'));

hdlsetup('voter_basic_autopipe_systemV2')

hdlsetuptoolpath('ToolName', 'Xilinx Vivado', 'ToolPath', 'C:\xilinx\Vivado\2015.1\bin\vivado.bat'); Prepending following Xilinx Vivado path(s) to the system path: C:\xilinx\Vivado\2015.1\bin

Then I run the HDL coder workflow advisor and no Zybo appears in the list..

I erased the path information from the *.tcl file and also added the xdc file. I have changed the version of Vivado in these files so it matches my version. I also tried leaving 14.2 but it was not working either. I tried saving the ZYBO folder in C:\MATLAB\ZYBO but in case it is something with the space of “program files” but it does not work. I don’t know if I have to add anything else or if it is just my version of Vivado.

does anyone have any additional information?

Thanks a million

valverj

[Darsana Thulasi]

You mentioned that files are attached. Do you have any that you can share?

[Juan Valverde]

I solved it, it was a problem with my version of Matlab. Actually, I had not seen the Zybo is already included in R2015a. Thanks

Answer 1

[Kiran Kintali]

https://www.mathworks.com/help/hdlcoder/ug/define-and-register-custom-board-and-reference-design-for-zynq-workflow.html

This example shows how to define and register a custom board and reference design in the Zynq® workflow.

You can register the Digilent® Zybo Z7-10 Zynq development board and a custom reference design in the HDL Workflow Advisor for the Zynq workflow.

This example uses a Zybo Z7-10 Zynq board, but you can define and register a custom board or a custom reference design for other Zynq platforms.Requirements

• Xilinx Vivado Design Suite, with the supported version listed in HDL Language Support and Supported Third-Party Tools and Hardware
• Digilent® Zybo Z7-10 Zynq™ development board with the accessory kit
• HDL Coder Support Package for Xilinx Zynq Platform
• Embedded Coder Support Package for Xilinx Zynq Platform