Info
Questa domanda è chiusa. Riaprila per modificarla o per rispondere.
Obscure state space variables of a synchronous machine (generator) 'State-Space(1)...State-Space(12)': What are they exactly? What do they mean?
1 visualizzazione (ultimi 30 giorni)
Mostra commenti meno recenti
When I blockwise linearize a synchronous machine (at a steady state operating point) I get 12 obscure state space variables (see below) State-Space(1)...State-Space(2): I am wondering what these things are. Any help would be appreciated.
>> linsys1.StateName
ans =
25×1 cell array
'Rotor angle dthetae'
'fluxes(1)'
'fluxes(2)'
'fluxes(3)'
'fluxes(4)'
'fluxes(5)'
'State-Space(1)'
'State-Space(2)'
'State-Space(3)'
'State-Space(4)'
'State-Space(5)'
'State-Space(6)'
'State-Space(7)'
'State-Space(8)'
'State-Space(9)'
'State-Space(10)'
'State-Space(11)'
'State-Space(12)'
'dw_delay'
'dw_predict'
'theta'
'voltages(1)'
'voltages(2)'
'voltages(3)'
'Rotor speed deviation (dw)'
0 Commenti
Risposte (1)
Sebastian Castro
il 10 Lug 2017
If you do this from the Linear Analysis app, you can view the linearization results and highlight the blocks. See, for example, https://www.mathworks.com/help/slcontrol/ug/troubleshooting-linearization.html#bspsmxf-1
If you're doing this all command-line, there is an option to use the full block path for the state names, as shown below.
opts = linearizationOptions('UseFullBlockNameLabels','on');
linsys1 = linearize('modelName',io,opts);
linsys1.StateName
- Sebastian
1 Commento
Questa domanda è chiusa.
Vedere anche
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!