I have a rotary encoder connected to my arduino to measure velocity, how can I read that output with matlab?
1 visualizzazione (ultimi 30 giorni)
Mostra commenti meno recenti
Hello, I am new to Arduino and connection to matlab, but i have a project in which one part required reading velocity with a rotary encoder. Is there a way to read that output and save it with matlab? thanks!
Here is the code
void setup() {
Serial.begin (9600);
pinMode(2, INPUT_PULLUP); // internal pullup input pin 2
pinMode(3, INPUT_PULLUP); // internalเป็น pullup input pin 3
pinMode(7, OUTPUT);
//Setting up interrupt
//A rising pulse from encodenren activated ai0(). AttachInterrupt 0 is DigitalPin nr 2 on moust Arduino.
attachInterrupt(0, ai0, RISING);
//B rising pulse from encodenren activated ai1(). AttachInterrupt 1 is DigitalPin nr 3 on moust Arduino.
attachInterrupt(1, ai1, RISING);
}
void loop() {
// Send the value of counter
// if( counter != temp ){
// Serial.println (counter);
// temp = counter;
newposition = encoder0Pos;
newtime = millis();
vel = abs((newposition-oldposition)) * 1000 /(newtime-oldtime);
Serial.print ("old position:");
Serial.print (oldposition);
Serial.print ("new position:");
Serial.print (newposition);
Serial.print ("speed = ");
Serial.println (vel);
digitalWrite (7,vel);
oldposition = newposition;
oldtime = newtime;
delay(250);
}
//}
void ai0() {
// ai0 is activated if DigitalPin nr 2 is going from LOW to HIGH
// Check pin 3 to determine the direction
if(digitalRead(3)==LOW) {
//counter++;
newposition++;
}else{
//counter--;
newposition--;
}
}
void ai1() {
// ai0 is activated if DigitalPin nr 3 is going from LOW to HIGH
// Check with pin 2 to determine the direction
if(digitalRead(2)==LOW) {
//counter--;
newposition--;
}else{
//counter++;
newposition++;
}
}
0 Commenti
Risposte (1)
Darshan Ramakant Bhat
il 17 Gen 2018
It is possible to read the sensor data from Arduino using MATLAB. Following links will give more details about the same:
0 Commenti
Vedere anche
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!