Why are the lines not showing up on my graphs?
1 visualizzazione (ultimi 30 giorni)
Mostra commenti meno recenti
Anna Zito
il 25 Mag 2020
Commentato: Star Strider
il 25 Mag 2020
g=9.81;
Ta=10;
mA=20;
for i=1:100
M=(i-1)*(30/99);
mB=4.05;
mC=M;
mD=M;
JC=0.005*M;
JD=JC;
JA=0.8055;
A=[mA 0 -1 1 0 0 0; (5*JA) 0 0.2 0 0 0 0; (10*JC) 0 0 -0.1 0 0.1 0; 0 mD 0 0 -1 -1 -1; 0 (10*JD) 0 0 0 -0.1 0.1; 0 mB 0 0 -1 0 0; -0.5 1 0 0 0 0 0];
B=[0; Ta; 0; (-mD*g); 0; (-mB*g); 0];
x=inv(A)*B;
aA(i)=x(1); aB(i)=x(2); FA(i)=x(3); TA(i)=x(4); TB(i)=x(5); TC(i)=x(6); TD(i)=x(7);
end
Mvector=linspace(0,30,100);
plot(Mvector, aA(i),'g',Mvector,aB(i),'b-.');
title('Acceleration');
legend('Disk A','Mass B');
xlabel('M (kg)');
ylabel('Acceleration (m/s^2)');
pause
plot(Mvector,aA(i),'g',Mvector,aB(i),'b-.');
title('Acceleration');
legend('Disk A','Mass M');
xlabel('M (kg)');
ylabel('acceleration (m/s^2)');
pause
plot(Mvector, FA(i),'k');
title('Plot 3');
xlabel('M (kg)');
ylabel('FA (N)');
pause
plot(Mvector,TA(i),'g',Mvector,TB(i),'b-.');
title('Plot 4');
legend('Cable A','Cable B');
xlabel('M (kg)');
ylabel('Tension (N))');
pause
plot(Mvector,TA(i),'g',Mvector,TC(i),'b:',Mvector,TD(i),'r-.');
title('Plot 5');
legend('Cable A','Cable C','Cable D');
xlabel('M (kg)');
ylabel('Tension (N)');
pause
plot(Mvector,FA(i)/(mA*g),'k');
title('Plot 6');
xlabel('M (kg)');
ylabel('mu');
0 Commenti
Risposta accettata
Star Strider
il 25 Mag 2020
You are only plotting one point (that being the last point) and it is not possible to plot lines with only one point.
Try this:
Mvector=linspace(0,30,100);
figure
plot(Mvector, aA,'g',Mvector,aB,'b-.');
title('Acceleration');
legend('Disk A','Mass B');
xlabel('M (kg)');
ylabel('Acceleration (m/s^2)');
% pause
figure
plot(Mvector,aA,'g',Mvector,aB,'b-.');
title('Acceleration');
legend('Disk A','Mass M');
xlabel('M (kg)');
ylabel('acceleration (m/s^2)');
% pause
figure
plot(Mvector, FA,'k');
title('Plot 3');
xlabel('M (kg)');
ylabel('FA (N)');
% pause
figure
plot(Mvector,TA,'g',Mvector,TB,'b-.');
title('Plot 4');
legend('Cable A','Cable B');
xlabel('M (kg)');
ylabel('Tension (N))');
% pause
figure
plot(Mvector,TA,'g',Mvector,TC,'b:',Mvector,TD(i),'r-.');
title('Plot 5');
legend('Cable A','Cable C','Cable D');
xlabel('M (kg)');
ylabel('Tension (N)');
% pause
figure
plot(Mvector,FA/(mA*g),'k');
title('Plot 6');
xlabel('M (kg)');
ylabel('mu');
Also, you were overplotting each new plot on the previous one, erasing the previous one. Since it appears you want them on separate figures, this slightly revised code does that. If you want to plot all of them on the sane axes, use the hold function.
7 Commenti
Più risposte (0)
Vedere anche
Categorie
Scopri di più su National Instruments Frame Grabbers in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!