How an I manipulate top and bottom x axes individually?
84 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Rod Letchford
il 30 Ago 2020
Risposto: Rod Letchford
il 31 Ago 2020
I want to control the x axis top and bottom individually / separately.
Specifically I want to point the bottom x axis ticks out and the top x axis ticks in ( and point left y axis out and right y axis in).
2 Commenti
dpb
il 30 Ago 2020
The 'TickDirection' property is global for the X- and Y- axis objects; there's insufficient granularity of properties to modify one but not the other.
You could make two axes, and set one 'in' and one 'out', but then both would show anyway...
Don't see any way to do this other than to physically draw ticks where wanted if it's that important to go to the trouble.
Risposta accettata
J. Alex Lee
il 30 Ago 2020
Actually, dpb's suggestion of 2 axes should work as long as you don't turn "box on", and you may need to sync their positions if you do things like add axis labels, etc.
fig = figure;
ax(1) = axes(fig,'Color','none');
ax(2) = axes(fig,'Color','none');
ax(2).YAxisLocation = 'right';
ax(2).XAxisLocation = 'top';
ax(2).XAxis.TickDirection = 'out'
ax(1).YAxis.TickDirection = 'out'
1 Commento
dpb
il 30 Ago 2020
" 2 axes should work as long as you don't turn "box on"
Ah-so! Indeed. Didn't think about box leaving off the opposite side ticks...good catch.
Più risposte (1)
Vedere anche
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!