How do I split a color image into its 3 RGB channels?

970 visualizzazioni (ultimi 30 giorni)
Hi,
How can I split a color image into its 3 RGB channels, like in this link:
Thanks
  3 Commenti
srikantanss ss
srikantanss ss il 23 Mag 2016
no Walter,the idea is to split only color regions

Accedi per commentare.

Risposta accettata

Image Analyst
Image Analyst il 10 Lug 2017
You can do that with this code:
% Read in original RGB image.
rgbImage = imread('flower.png');
% Extract color channels.
redChannel = rgbImage(:,:,1); % Red channel
greenChannel = rgbImage(:,:,2); % Green channel
blueChannel = rgbImage(:,:,3); % Blue channel
% Create an all black channel.
allBlack = zeros(size(rgbImage, 1), size(rgbImage, 2), 'uint8');
% Create color versions of the individual color channels.
just_red = cat(3, redChannel, allBlack, allBlack);
just_green = cat(3, allBlack, greenChannel, allBlack);
just_blue = cat(3, allBlack, allBlack, blueChannel);
% Recombine the individual color channels to create the original RGB image again.
recombinedRGBImage = cat(3, redChannel, greenChannel, blueChannel);
% Display them all.
subplot(3, 3, 2);
imshow(rgbImage);
fontSize = 20;
title('Original RGB Image', 'FontSize', fontSize)
subplot(3, 3, 4);
imshow(just_red);
title('Red Channel in Red', 'FontSize', fontSize)
subplot(3, 3, 5);
imshow(just_green)
title('Green Channel in Green', 'FontSize', fontSize)
subplot(3, 3, 6);
imshow(just_blue);
title('Blue Channel in Blue', 'FontSize', fontSize)
subplot(3, 3, 8);
imshow(recombinedRGBImage);
title('Recombined to Form Original RGB Image Again', 'FontSize', fontSize)
% Set up figure properties:
% Enlarge figure to full screen.
set(gcf, 'Units', 'Normalized', 'OuterPosition', [0, 0, 1, 1]);
% Get rid of tool bar and pulldown menus that are along top of figure.
% set(gcf, 'Toolbar', 'none', 'Menu', 'none');
% Give a name to the title bar.
set(gcf, 'Name', 'Demo by ImageAnalyst', 'NumberTitle', 'Off')
My MATLAB code produces this figure:
which you can see is the same as your example figure you gave:
The original flower image is attached. I cropped it out of your figure.
  2 Commenti
Mahmood Aldhuhl
Mahmood Aldhuhl il 28 Nov 2020
hello sir
i try typing the code but show this messgae
Error in Q5 (line 7)
redChannel = rgbImage(:,:,1); % Red channel
DGM
DGM il 11 Feb 2023
The only way you'll get an error on that specific line is if rgbImage does not exist. The only way it won't exist is if you didn't create it as the given example does.

Accedi per commentare.

Più risposte (5)

sixwwwwww
sixwwwwww il 22 Ott 2013
If you want to show RGB channels in there original color then you can do like it:
img = imread('filename.png'); % Read image
red = img(:,:,1); % Red channel
green = img(:,:,2); % Green channel
blue = img(:,:,3); % Blue channel
a = zeros(size(img, 1), size(img, 2));
just_red = cat(3, red, a, a);
just_green = cat(3, a, green, a);
just_blue = cat(3, a, a, blue);
back_to_original_img = cat(3, red, green, blue);
figure, imshow(img), title('Original image')
figure, imshow(just_red), title('Red channel')
figure, imshow(just_green), title('Green channel')
figure, imshow(just_blue), title('Blue channel')
figure, imshow(back_to_original_img), title('Back to original image')
I hope it helps. Good luck!
  5 Commenti
Jan
Jan il 5 Mar 2018
bassel mar wrote:
Very good and simple code
@bassel mar: Please do not use flags to post a comment, because they are used to inform admins and editors about inappropriate contents like spam or rudeness.

Accedi per commentare.


David Sanchez
David Sanchez il 22 Ott 2013
my_rgb = my_image;
R = my_rgb(:,:,1);
G = my_rgb(:,:,2);
B = my_rgb(:,:,3);
  5 Commenti
Image Analyst
Image Analyst il 28 Nov 2020
An RGB image is like three 2-D monochrome/grayscale images stacked on top of each other in the third dimension. See attached demo for a visualization:
The code basically extracts each 2-D image from the 3-D image into a separate 2-D array. With MATLAB Release 2018b and later, you can use imsplit() instead
[R, G, B] = imsplit(rgbImage);

Accedi per commentare.


diya
diya il 3 Mag 2016
how to split rgb image to just take red color and to supress high intensities
  1 Commento
Image Analyst
Image Analyst il 3 Mag 2016
You know how to extract the red channel already
redChannel = rgbImage(:, :, 1);
Now explain what "suppress" means to you. Do you want to set high values to zero? Multiply them by 0.5 or some other number? Apply a gamma curve?

Accedi per commentare.


Adam G
Adam G il 12 Lug 2017
Modificato: Adam G il 15 Lug 2017
I have picture hand.tif.
%the best idea is to make screenshot of this picture
I have following codes
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
imfinfo('hand.tif');
[L1]= imread('hand.tif');
figure, imshow(L1);
L1r=L1(:, :, 1);
L1g=L1(:, :, 2);
L1b=L1(:, :, 3);
figure;
imshow(cat(3, L1r, ones(size(L1g)), ones(size(L1b))));
figure;
imshow(cat(3, ones(size(L1r)), L1g, ones(size(L1b))));
figure;
imshow(cat(3, ones(size(L1r)), ones(size(L1g)), L1b));
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
I got following pictures
and okay. I have following code
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
imfinfo('hand.tif');
[L1]= imread('hand.tif');
L1=double(L1)/255;
figure, imshow(L1);
L1c=L1(:, :, 1);
L1m=L1(:, :, 2);
L1y=L1(:, :, 3);
figure;
imshow(cat(3, L1c, ones(size(L1m)), ones(size(L1y))));
figure;
imshow(cat(3, ones(size(L1c)), L1m, ones(size(L1y))));
figure;
imshow(cat(3, ones(size(L1c)), ones(size(L1m)), L1y));
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
I got following pictures
Is it matlab error or what?
So now I check matrix L1r
L1r=
0 0 0 0 0
0 5 5 3 3
0 5 4 3 4
0 3 4 2 3
0 3 4 2 1
I check matrix L1c
L1c=
0 0 0 0 0
0 0,0196078431372549 0,0196078431372549 0,0117647058823529 0,0117647058823529
0 0,0196078431372549 0,0156862745098039 0,0117647058823529 0,0156862745098039
0 0,0117647058823529 0,0156862745098039 0,00784313725490196 0,0117647058823529
0 0,0117647058823529 0,0156862745098039 0,00784313725490196 0,00392156862745098
Strange when I make L1=double(L1)/255
L1c=L1r/255
cyan=red/255
or matlab error and I got wrong colormap?
???????????? so what color is in matrix L1r and L1c?
I check in Paint Program and I got red color =5 (position of pixel 2,2 ) so L1r should be red, but L1c????
  6 Commenti
frishta fro
frishta fro il 21 Giu 2020
who can hehp me to solve that pleeeeeeeeeeees
Write a Matlab program to do the following operations in the attached image.
1- Find the negative of the brain image.
2- Reduce the intensity of Red channel by 80.
3- Increase the intensity of Green channel by 50.
4- Save the output image as a name brain2.jpg.
Image Analyst
Image Analyst il 21 Giu 2020
  1. Use imread(), then
  2. Invert the images using img=255-img
  3. if image is grayscale, make red, green, and blue equal to the image, otherwise get the red, green, and blue using imsplit()
  4. Use addition or subtraction to change each color channel
  5. Combine into color image using cat(3, red, green, blue)
  6. Write using imwrite()

Accedi per commentare.


yazan abusamra
yazan abusamra il 4 Dic 2022
Spostato: DGM il 11 Feb 2023
hello I have an old photo for my grampa it is rgb but it lookes like gray photo the problem is that the rgb chanels have very close values to each other in all pixels how can I solve this problem and restore the photo so I can see the original color
  3 Commenti
DGM
DGM il 6 Dic 2022
Spostato: DGM il 11 Feb 2023
It sounds like a scan/photo of a black & white print or something. If that's the case, the color content is an artifact of the capture method, not the scene content. That would make this a colorization problem, not an adjustment problem.
If it's a faded/degraded color print, there might be adjustment possibilites, but they can easily be limited by the condition and format of the image.
That said, we'd need more information about the images (examples and perhaps an explanation of why they turned gray). I'd be interested, but I agree with Walter.

Accedi per commentare.

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by