MathWorks Motor Control Blockset Team

Last seen: 28 giorni fa | Attivo dal 2023

Followers: 0 Following: 0

Statistica

All

Feeds

Inviato

Motor Control with PFC using Microchip Kit
Sensorless Field‑Oriented Control of PMSM with Power Factor Correction on Microchip MCHV‑230VAC‑1.5kW Development Board

28 giorni fa | 4 download |

0.0 / 5

Risposto
How does this block diagram convert input current to per unit value?
This implementation assumes a 12-bit ADC, where the full-scale ADC count is 4095. The measured current is represented in per-uni...

circa 2 mesi fa | 0

Inviato

Motor Control Using NXP™ Development Kits
Field-Oriented Control of Permanent Magnet Synchronous Motor Using NXP™ Development kits

3 mesi fa | 1879 download |

5.0 / 5

Inviato

Identify-and-Validate-Optimal-Motor-Rating
This repo illustrates a workflow to use Virtual Vehicle Composer with Motor Control Blockset to identify and validate motor rati...

4 mesi fa | 4 download |

0.0 / 5

Risposto
PMSM motor cannot start up when using launchpad F28379D + FOC in simulink
Run the example in open-loop control mode to validate the hardware setup and motor. The example has an open loop start-up. Modif...

10 mesi fa | 0

Risposto
示例《Sensorless Field-Oriented Control of PMSM Using DC Shunt Current Sensing》中，仿真和代码生成的相移方向是相反的，应如何理解？
Hello, thank you for the question. Your observation is correct. Hardware configuration is for rising edge but simulation plant l...

10 mesi fa | 0

| accettato

Inviato

Demos for Motor Control Deployment on Renesas Controllers
PMSM control examples using the Renesas motor control development kits.

oltre un anno fa | 300 download |

0.0 / 5

Risposto
Sensorless Control with High Frequency Signal Injection at Low Speed
Please refer to the following document page: Initial Position Estimation and Field-Weakening Control of IPMSM Using Pulsating Hi...

oltre un anno fa | 0

Risposto
How to generate first value for Kp, Ki of PID in current controller
Please refer to the following document page: Estimate Control Gains and Use Utility Functions.

oltre un anno fa | 1

Risposto
In the BLDC motor block, a non-standard d'q' Transformation is used. Does this affect the values of L_d and L_q?
Thank you for providing your valuable feedback. The factor of π is a typographical error in the documentation and will be correc...

oltre un anno fa | 0

Inviato

Motor Swap of PMSM Using Microchip MCS MCLV-48V-300W
Run any three-phase PMSM using Microchip MCS MCLV-48V-300W Development Board and dsPIC33AK128MC106 MC DIM

oltre un anno fa | 56 download |

0.0 / 5

Inviato

Demos for Motor Control Deployment on Microchip Controllers
PMSM control examples using the Microchip motor control development kit.

oltre 2 anni fa | 619 download |

0.0 / 5

Risposto
TI F28379D Launchpad Serial Communication Failure
In mcb_param_est_host_read, update the COM port in 3 blocks, Host Serial Setup, Host Serial Receive, Host Serial Transmit. You ...

quasi 3 anni fa | 0

| accettato

Risposto
I want to make 'Deploying Motor Control Algorithms on Microchip dsPIC, PIC32, and SAM Controllers'. But MPLAB version is different. Could you give me the 3.50 version?
Hi, Please post a query at MPLAB Device Block page to check if it supports 3.50 version.

quasi 3 anni fa | 0