The benchmarks in this example have been measured on a machine with four physical cores.

This example shows how to accelerate a signal processing algorithm in
MATLAB^{®} using the `codegen`

and `dspunfold`

functions. You can generate a MATLAB executable (MEX function) from an entire MATLAB function or specific parts of the MATLAB function. When you run the MEX function
instead of the original MATLAB code,
simulation speed can increase significantly. To generate the MEX equivalent, the
algorithm must support code generation.

To use `codegen`

, you must have MATLAB
Coder™ installed. To use `dspunfold`

, you must have MATLAB
Coder and DSP System
Toolbox™ installed.

To use `dspunfold`

on Windows and Linux, you must
use a compiler that supports the Open Multi-Processing (OpenMP) application interface.
See Supported
Compilers.

Consider a simple FIR filter algorithm to accelerate. Copy the
`firfilter`

function code into the
`firfilter.m`

file.

function [y,z1] = firfilter(b,x) % Inputs: % b - 1xNTaps row vector of coefficients % x - A frame of noisy input % States: % z, z1 - NTapsx1 column vector of states % Output: % y - A frame of filtered output persistent z; if (isempty(z)) z = zeros(length(b),1); end Lx = size(x,1); y = zeros(size(x),'like',x); z1 = z; for m = 1:Lx % Load next input sample z1(1,:) = x(m,:); % Compute output y(m,:) = b*z1; % Update states z1(2:end,:) = z1(1:end-1,:); z = z1; end

The `firfilter`

function accepts a vector of filter
coefficients, *b*, a noisy input
signal, *x*, as inputs. Generate the filter coefficients
using the `fir1`

function.

NTaps = 250; Fp = 4e3/(44.1e3/2); b = fir1(NTaps-1,Fp);

Filter a stream of a noisy sine wave signal by using
the `firfilter`

function. The sine wave has a frame
size of 4000 samples and a sample rate of 192 kHz. Generate the sine wave using the
`dsp.SineWave`

System
object™. The noise is a white Gaussian with a mean of 0 and a variance of
0.02. Name this function `firfilter_sim`

. The
`firfilter_sim`

function calls
the `firfilter`

function on the noisy input.

function totVal = firfilter_sim(b) % Create the signal source Sig = dsp.SineWave('SamplesPerFrame',4000,'SampleRate',19200); totVal = zeros(4000,500); R = 0.02; clear firfilter; % Iteration loop. Each iteration filters a frame of the noisy signal. for i = 1 : 500 trueVal = Sig(); % Original sine wave noisyVal = trueVal + sqrt(R)*randn; % Noisy sine wave filteredVal = firfilter(b,noisyVal); % Filtered sine wave totVal(:,i) = filteredVal; % Store the entire sine wave end

Run `firfilter_sim`

and measure the speed of execution.
The execution speed varies depending on your machine.

```
tic;totVal = firfilter_sim(b);t1 = toc;
fprintf('Original Algorithm Simulation Time: %4.1f seconds\n',t1);
```

Original Algorithm Simulation Time: 7.8 seconds

`codegen`

Call `codegen`

on `firfilter`

, and generate
its MEX equivalent, `firfilter_mex`

. Generate and pass the filter
coefficients and the sine wave signal as inputs to the
`firfilter`

function.

Ntaps = 250; Sig = dsp.SineWave('SamplesPerFrame',4000,'SampleRate',19200); % Create the Signal Source R = 0.02; trueVal = Sig(); % Original sine wave noisyVal = trueVal + sqrt(R)*randn; % Noisy sine wave Fp = 4e3/(44.1e3/2); b = fir1(Ntaps-1,Fp); % Filter coefficients codegen firfilter -args {b,noisyVal}

In the `firfilter_sim`

function, replace
`firfilter(b,noisyVal)`

function call with
`firfilter_mex(b,noisyVal)`

. Name this function
`firfilter_codegen`

.

function totVal = firfilter_codegen(b) % Create the signal source Sig = dsp.SineWave('SamplesPerFrame',4000,'SampleRate',19200); totVal = zeros(4000,500); R = 0.02; clear firfilter_mex; % Iteration loop. Each iteration filters a frame of the noisy signal. for i = 1 : 500 trueVal = Sig(); % Original sine wave noisyVal = trueVal + sqrt(R)*randn; % Noisy sine wave filteredVal = firfilter_mex(b,noisyVal); % Filtered sine wave totVal(:,i) = filteredVal; % Store the entire sine wave end

Run `firfilter_codegen`

and measure the speed of execution. The
execution speed varies depending on your machine.

tic;totValcodegen = firfilter_codegen(b);t2 = toc; fprintf('Algorithm Simulation Time with codegen: %5f seconds\n',t2); fprintf('Speedup factor with codegen: %5f\n',(t1/t2));

Algorithm Simulation Time with codegen: 0.923683 seconds Speedup factor with codegen: 8.5531

The speedup gain is approximately `8.5`

.

`dspunfold`

The `dspunfold`

function generates a multithreaded MEX file
which can improve the speedup gain even further.

`dspunfold`

also generates a single-threaded MEX file and a
self-diagnostic analyzer function. The multithreaded MEX file leverages the
multicore CPU architecture of the host computer. The single-threaded MEX file is
similar to the MEX file that the `codegen`

function generates.
The analyzer function measures the speedup gain of the multithreaded MEX file over
the single-threaded MEX file.

Call `dspunfold`

on `firfilter`

and generate
its multithreaded MEX equivalent, `firfilter_mt`

. Detect the
state length in samples by using the `-f`

option, which can improve
the speedup gain further. `-s auto`

triggers the automatic state
length detection. For more information on using the `-f`

and
`-s`

options, see `dspunfold`

.

dspunfold firfilter -args {b,noisyVal} -s auto -f [false,true]

State length: [autodetect] samples, Repetition: 1, Output latency: 8 frames, Threads: 4 Analyzing: firfilter.m Creating single-threaded MEX file: firfilter_st.mexw64 Searching for minimal state length (this might take a while) Checking stateless ... Insufficient Checking 4000 samples ... Sufficient Checking 2000 samples ... Sufficient Checking 1000 samples ... Sufficient Checking 500 samples ... Sufficient Checking 250 samples ... Sufficient Checking 125 samples ... Insufficient Checking 187 samples ... Insufficient Checking 218 samples ... Insufficient Checking 234 samples ... Insufficient Checking 242 samples ... Insufficient Checking 246 samples ... Insufficient Checking 248 samples ... Insufficient Checking 249 samples ... Sufficient Minimal state length is 249 samples Creating multi-threaded MEX file: firfilter_mt.mexw64 Creating analyzer file: firfilter_analyzer.p

The automatic state length detection tool detects an exact state length of
`259`

samples.

Call the analyzer function and measure the speedup gain of the multithreaded MEX file with respect to the single-threaded MEX file. Provide at least two different frames for each input argument of the analyzer. The frames are appended along the first dimension. The analyzer alternates between these frames while verifying that the outputs match. Failure to provide multiple frames for each input can decrease the effectiveness of the analyzer and can lead to false positive verification results.

firfilter_analyzer([b;0.5*b;0.6*b],[noisyVal;0.5*noisyVal;0.6*noisyVal]);

Analyzing multi-threaded MEX file firfilter_mt.mexw64. For best results, please refrain from interacting with the computer and stop other processes until the analyzer is done. Latency = 8 frames Speedup = 3.2x

`firfilter_mt`

has a speedup gain factor of
`3.2`

when compared to the single-threaded MEX file,
`firfilter_st`

. To increase the speedup further, increase the
repetition factor using the `-r`

option. The tradeoff is that the
output latency increases. Use a repetition factor of `3`

. Specify
the exact state length to reduce the overhead and increase the speedup
further.

dspunfold firfilter -args {b,noisyVal} -s 249 -f [false,true] -r 3

State length: 249 samples, Repetition: 3, Output latency: 24 frames, Threads: 4 Analyzing: firfilter.m Creating single-threaded MEX file: firfilter_st.mexw64 Creating multi-threaded MEX file: firfilter_mt.mexw64 Creating analyzer file: firfilter_analyzer.p

Call the analyzer function.

firfilter_analyzer([b;0.5*b;0.6*b],[noisyVal;0.5*noisyVal;0.6*noisyVal]);

Analyzing multi-threaded MEX file firfilter_mt.mexw64. For best results, please refrain from interacting with the computer and stop other processes until the analyzer is done. Latency = 24 frames Speedup = 3.8x

The speedup gain factor is `3.8`

, or approximately 32 times the
speed of execution of the original simulation.

For this particular algorithm, you can see that `dspunfold`

is
generating a highly optimized code, without having to write any C or C++ code. The
speedup gain scales with the number of cores on your host machine.

The FIR filter function in this example is only an illustrative algorithm that is
easy to understand. You can apply this workflow on any of your custom algorithms. If
you want to use an FIR filter, it is recommended that you use the `dsp.FIRFilter`

System
object in DSP System
Toolbox. This object runs much faster than the benchmark numbers presented in
this example, without the need for code generation.