Uncertain Matrices
Uncertain matrices (class umat
) are built from doubles and uncertain
elements, using traditional MATLAB^{®} matrix building syntax. Uncertain matrices can be added, subtracted, multiplied,
inverted, transposed, etc., resulting in uncertain matrices. The rows and columns of an
uncertain matrix are referenced in the same manner that MATLAB references rows and columns of an array, using parenthesis, and integer indices.
The NominalValue
of a uncertain matrix is the result obtained when all
uncertain elements are replaced with their own NominalValue
. The uncertain
elements making up a umat
are accessible through the
Uncertainty
gateway, and the properties of each element within a
umat
can be changed directly. The properties
are:
Properties 
Meaning 
Class 


Nominal value of element 


Uncertain blocks in the matrix, stored as a structure whose fields are named
after the uncertain blocks, and contain the uncertain elements, such as



Sampling grid, for 




Using usubs
, specific values may be substituted for
any of the uncertain elements within a umat
. The command usample
generates a random sample of the
uncertain matrix, substituting random samples (within their ranges) for each of the uncertain
elements.
The command wcnorm
computes tight bounds on the worstcase
(maximum over the uncertain elements' ranges) norm of the uncertain matrix.
Standard MATLAB numerical matrices (i.e., double
) naturally can be viewed as
uncertain matrices without any uncertainty.
Create and Manipulate Uncertain Matrices
You create uncertain matrices (umat
objects) by creating uncertain parameters and using them to build matrices. You can then use uncertain matrices to build uncertain statespace models. This example shows how to create an uncertain matrix, access and change its uncertain parameters, extract elements, and perform matrix arithmetic.
For example, create two uncertain real parameters, and use them to create a 3by2 uncertain matrix.
a = ureal('a',3); b = ureal('b',10,'Percentage',20); M = [a, 1/b; b, a+1/b; 1, 3]
Uncertain matrix with 3 rows and 2 columns. The uncertainty consists of the following blocks: a: Uncertain real, nominal = 3, variability = [1,1], 2 occurrences b: Uncertain real, nominal = 10, variability = [20,20]%, 3 occurrences Type "M.NominalValue" to see the nominal value and "M.Uncertainty" to interact with the uncertain elements.
Examine and Modify umat
Properties
M
is a umat
object. Examine its properties using get
.
get(M)
NominalValue: [3x2 double] Uncertainty: [1x1 struct] SamplingGrid: [1x1 struct] Name: ''
The nominal value of M
is the matrix obtained by replacing all the uncertain elements with their nominal values.
M.NominalValue
ans = 3×2
3.0000 0.1000
10.0000 3.1000
1.0000 3.0000
The Uncertainty
property is a structure containing the uncertain elements (the Control Design Blocks) of M
.
M.Uncertainty
ans = struct with fields:
a: [1x1 ureal]
b: [1x1 ureal]
M.Uncertainty.a
Uncertain real parameter "a" with nominal value 3 and variability [1,1].
Use the Uncertainty
property for direct access to the uncertain elements. For example, check the Range
of the uncertain element a
within M
.
M.Uncertainty.a.Range
ans = 1×2
2 4
The range is [2,4]
because you created the ureal
parameter a
with a nominal value 3 and the default uncertainty of +/ 1. Change the range to [2.5,5]
.
M.Uncertainty.a.Range = [2.5,5]
Uncertain matrix with 3 rows and 2 columns. The uncertainty consists of the following blocks: a: Uncertain real, nominal = 3, variability = [0.5,2], 2 occurrences b: Uncertain real, nominal = 10, variability = [20,20]%, 3 occurrences Type "M.NominalValue" to see the nominal value and "M.Uncertainty" to interact with the uncertain elements.
This change to a
only takes place within M
. Verify that the variable a
in the MATLAB workspace still has the original range.
a.Range
ans = 1×2
2 4
You cannot combine elements that have a common internal name, but different properties. So, for example, entering M.Uncertainty.a  a
would generate an error, because the realp
parameter a
in the workspace has different properties from the element a
in M
.
Row and Column Referencing
You can use standard rowcolumn referencing to extract elements from a umat
. For example, extract a 2by2 selection from M
consisting of its second and third rows.
Msub = M(2:3,:)
Uncertain matrix with 2 rows and 2 columns. The uncertainty consists of the following blocks: a: Uncertain real, nominal = 3, variability = [0.5,2], 1 occurrences b: Uncertain real, nominal = 10, variability = [20,20]%, 2 occurrences Type "Msub.NominalValue" to see the nominal value and "Msub.Uncertainty" to interact with the uncertain elements.
You can use single indexing only if the umat
is a single column or row. Make a singlecolumn selection from M
and use singleindex references to access elements of it.
Msing = M([2 1 2 3],2); Msing(2)
Uncertain matrix with 1 rows and 1 columns. The uncertainty consists of the following blocks: b: Uncertain real, nominal = 10, variability = [20,20]%, 1 occurrences Type "ans.NominalValue" to see the nominal value and "ans.Uncertainty" to interact with the uncertain elements.
You can use indexing to change the value of any element of a umat
. For example, set the (3,2) entry of M
to an uncertain parameter c
.
c = ureal('c',3,'Percentage',40); M(3,2) = c
Uncertain matrix with 3 rows and 2 columns. The uncertainty consists of the following blocks: a: Uncertain real, nominal = 3, variability = [0.5,2], 2 occurrences b: Uncertain real, nominal = 10, variability = [20,20]%, 2 occurrences c: Uncertain real, nominal = 3, variability = [40,40]%, 1 occurrences Type "M.NominalValue" to see the nominal value and "M.Uncertainty" to interact with the uncertain elements.
M now has three uncertain blocks.
Matrix Operations on umat
Objects
You can perform many matrix operations on a umat
object, such as matrixmultiply, transpose, and inverse. You can also combine uncertain matrices with numeric matrices that do not have uncertainty.
For example, premultiply M
by a 1by3
numeric matrix, resulting in a 1by2 umat
.
M1 = [2 3 1]*M;
Verify that the first entry of M1
is as expected, 2*a + 3*b + 1
.
d = M1(1)  (2*M.Uncertainty.a + 3*M.Uncertainty.b + 1)
Uncertain matrix with 1 rows, 1 columns, and no uncertain blocks. Type "d.NominalValue" to see the nominal value and "d.Uncertainty" to interact with the uncertain elements.
Transpose M
, form a product, and invert it. As expected, the product of a matrix and its inverse is the identity matrix. You can verify this by sampling the result.
H = M.'*M; K = inv(H); usample(K*H,3)
ans = ans(:,:,1) = 1.0000 0.0000 0.0000 1.0000 ans(:,:,2) = 1.0000 0.0000 0.0000 1.0000 ans(:,:,3) = 1.0000 0.0000 0.0000 1.0000
Lifting a Double Matrix to umat
You can convert a numeric matrix to a umat
object with no uncertain elements. Use the umat
command to lift a double matrix to the umat
class. For example:
Md = [1 2 3;4 5 6]; M = umat(Md)
Uncertain matrix with 2 rows, 3 columns, and no uncertain blocks. Type "M.NominalValue" to see the nominal value and "M.Uncertainty" to interact with the uncertain elements.
You can also convert higherdimension numeric matrices to umat
. When you do so, the software interprets the third dimension and beyond as array dimensions. For example, convert a random threedimensional numeric array to umat
.
Md = randn(4,5,6); M = umat(Md)
6x1 array of uncertain matrices with 4 rows, 5 columns, and no uncertain blocks. Type "M.NominalValue" to see the nominal value and "M.Uncertainty" to interact with the uncertain elements.
The result is a onedimensional array of uncertain matrices, rather than a threedimensional uncertain array. Similarly, a fourdimensional numeric array converts to a twodimensional array of umat
objects.
Md = randn(4,5,6,7); M = umat(Md)
6x7 array of uncertain matrices with 4 rows, 5 columns, and no uncertain blocks. Type "M.NominalValue" to see the nominal value and "M.Uncertainty" to interact with the uncertain elements.
See Array Management for Uncertain Objects for more information about multidimensional arrays of uncertain objects.