Circuit Envelope Simulation in MATLAB
The circuit envelope simulation technique enables you to perform time-varying harmonic balance analysis of an RF system around multiple carrier frequencies. You can use this technique to simulate RF systems operating with narrowband signals.
Use the rfsystem
System object™ and its associated object functions
to perform circuit envelope simulation at the MATLAB command
line.
Objects
rfsystem | Generate RF Blockset model and perform circuit envelope or idealized baseband simulation (Since R2021a) |
Functions
open_system | Open RF Blockset model created using
rfsystem
(Since R2021a) |
save_system | Save RF Blockset model created using rfsystem
(Since R2021a) |
close_system | Close RF Blockset model window created using
rfsystem
(Since R2021a) |
hide_system | Hide RF Blockset model window created using
rfsystem
(Since R2021a) |
load_system | Load RF Blockset model to memory (Since R2022a) |
Topics
- Circuit Envelope Simulation at MATLAB Command Line
Perform circuit envelope simulation at the MATLAB command line.
Related Information
Featured Examples
RF Receiver Modeling for LTE Reception
Model and test an LTE RF receiver.
Massive MIMO Hybrid Beamforming with RF Impairments
Employ hybrid beamforming at the transmit end of a massive MIMO communication system.
RF Impairments for 5G NR Downlink Waveforms
Model RF impairments for 5F NR downlink waveforms and then compute and visualize EVM of this waveform.
Power Amplifier and DPD Modeling for Dynamic EVM Measurement
Extract a PA model using measured data, verify the quality of the fitting, and simulate the PA model with and without DPD.
