This library contains sensors for the gas domain. These blocks output physical signals, not regular Simulink® signals. For information on how to connect these blocks to Simulink scopes or other Simulink blocks, see Connecting Simscape Diagrams to Simulink Sources and Scopes.
|Flow Rate Sensor (G)
|Measure mass, energy, and volumetric flow rates in gas networks (Da R2023a)
|Mach Number Sensor (G)
|Measure Mach number of internal gas flow (Da R2023b)
|Pressure & Temperature Sensor (G)
|Measure pressure and temperature in gas networks
|Thermodynamic Properties Sensor (G)
|Measure specific enthalpy, density, specific heat at constant pressure, and specific entropy
- Modeling Gas Systems
Steps and guidelines for gas system modeling.
- Simple Gas Model
This example shows how to create a simple open-loop gas network and set boundary conditions.
- Change Flow Boundary Conditions
This example shows how to change the gas flow boundary conditions without affecting temperature.
- Change Flow Direction
This example shows how the change in the gas flow direction affects the upstream temperature.