how to add errorbars
27 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
i want to add errorbars to this graph (the error bar are "std_150,std_100 and std_control" in the code).
thanks
the code:
mw_150=[14.5,19,8.5];
mw_100=[10.42,17.4,17.7];
control=[7.15,41.9,44.3];
std_150=[1.16,1.33,0.9];
std_100=[0.83,1.01,1.09];
std_control=[0.71,1.72,1.77];
bar([1 2 3],[mw_150' mw_100' control'])
legend('150mJ/cm2','100mJ/cm2','control');
set(gca, 'FontSize',12,'XTick',[1 2 3 ],'XTickLabel',{'1.5<A.R<2.5','2.5<A.R<3.5','A.R>3.5' });
ylabel('Relative precentage')
2 Commenti
dpb
il 19 Giu 2014
Not sure exactly how to envision error "bars" on a bar chart...can you describe what you think it should look like?
Only thoughts come to mind are either use a stacked bar but doesn't really seem like it would work well or use errorbar with the adjust x- coordinates for the bars and no line on the plotted line. I've not tried to see if can convince errorbar to draw the bars but not the trend line directly or whether it would take finding/setting appropriate line handle linestyle property.
Risposta accettata
Star Strider
il 19 Giu 2014
Modificato: Star Strider
il 19 Giu 2014
EDIT —
If you’d rather have it look like your attached figure, this code will work:
mw_150=[14.5,19,8.5];
mw_100=[10.42,17.4,17.7];
control=[7.15,41.9,44.3];
std_150=[1.16,1.33,0.9];
std_100=[0.83,1.01,1.09];
std_control=[0.71,1.72,1.77];
hb = bar([1 2 3],[mw_150' mw_100' control'])
legend('150mJ/cm2','100mJ/cm2','control');
set(gca, 'FontSize',12,'XTick',[1 2 3 ],'XTickLabel',{'1.5<A.R<2.5','2.5<A.R<3.5','A.R>3.5' });
ylabel('Relative precentage')
errbar = [std_150; std_100; std_control]; % CREATE ‘errbar’ MATRIX
yd = [mw_150' mw_100' control']';
hold on
for k1 = 1:3
errorbar([1:3]+.22*(k1-2), yd(k1,:), errbar(k1,:), '.k', 'LineWidth',2)
end
hold off
11 Commenti
Yeasir Mohammad Akib
il 6 Giu 2022
Hello State Strider,
Can you please expalin the meaning of this line:
for k1 = 1:size(mw_data,1)
errorbar(([1:4]-mv)*sclf+k1 ,mw_data(k1,:), errbar(k1,:), '.k', 'LineWidth',2)
end
The .k portion
Star Strider
il 6 Giu 2022
@Yeasir Mohammad Akib — It plots black dots, I believe to avoid connecting the error bars with lines. (This is nearly 8 year-old code. I do not remember what I was thinking back then when I wrote it.)
Più risposte (1)
dpb
il 19 Giu 2014
Modificato: dpb
il 19 Giu 2014
...scales the matrix to put the errorbars in the middle of the plotted bars, and I have no idea how MATLAB determines where it puts those bars. The handle graphics don’t say, because all the 'XData' values are the same for all variables. I cannot find anything in the documentation that alludes to where they are stored or how they are calculated...
Got's to go handle-diving Star--they're not identified per se, but you can compute the location by retrieving the XData property from the barseries object patch...
For the sample above for the first handle, one can find
>> xtik=get(get(hb(1),'children'),'xdata')
xtik =
0.6545 1.6545 2.6545
0.6545 1.6545 2.6545
0.8000 1.8000 2.8000
0.8000 1.8000 2.8000
>> mean(xtik(1:2:end,:))
ans =
0.7273 1.7273 2.7273
>>
By comparison, your heuristic values were
>> ([1]-mv)*sclf+[1:3]
ans =
0.7300 1.7300 2.7300
>>
Not bad... :)
2 Commenti
dpb
il 19 Giu 2014
No problem...came up with this w/ a poster's help when labeling a bar series w/ values. I'd always used a heuristic based on a the 'Width' parameter before but it wasn't completely reliable, either. This returns the real deal of where actually draws the patch object so is dead on...
Vedere anche
Categorie
Scopri di più su Errorbars in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!