Is there a way to Un-clip a sine wave?
7 visualizzazioni (ultimi 30 giorni)
Mostra commenti meno recenti
Morpheuskibbe
il 17 Ott 2019
Commentato: Morpheuskibbe
il 17 Ott 2019
I have a pile of data from a sensor and the sensor is getting maxed out. However, I knwo the data SHOULD be a sine wave and the top/bottom is only getting clipped off due to the sensor's limits. Is there a way to write an Mcode that will restore or unclip the sine wave?
I attached the worst of the data. As you can see in the third column, before you even bother to graph it, it's slamming into the top and bottom of the scale repeatedly.
0 Commenti
Risposta accettata
Bjorn Gustavsson
il 17 Ott 2019
You can do something like this:
sfcn = @(t,pars) pars(1)+pars(2)*sin(pars(3)*t+pars(end)); % sine-like function with offset and phase-shift
fitfcn = @(pars,y,t,sfcn) sum(( sfcn(t,pars) - y).^2); % Sum-of-square function
Clipped3 = clipped(:,3); % Your thirs column
t = 1:numel(Clipped3); % Some time-array for uniformly sampled data
% Identify your clipped data points:
iBad = find(Clipped3>290|Clipped3<2);
Clipped3(iBad) = []; % Cut those points out
t(iBad) = []; % from data and time-array
pars0 = [150,500,2*pi/(46.7),pi/2];
% this fitting is painfully sensitive to bad start-guess so the above line
% we set the average at 150, the oscillating amplitude to 500, and the angular
% frequency to fit with a period-time of 46-47 time-steps, and the phase-shift
% to pi/2 since your data starts at a peak not a zero
% Fit by minimizing sum of squared residuals:
parsOK = fminsearch(@(pars) fitfcn(pars,Clipped3,t',sfcn),pars0)
%parsOK =
% 166.1 240.25 0.13416 1.7285
plot(clipped(:,3),'b-') % initial curve
hold on
plot(t,Clipped3,'b.') % unclipped points
% Residuals:
plot(t,Clipped3'-sfcn(t,parsOK),'r.')
% Well-fitting sinusoidal curve
plot(t(1):t(end),sfcn(t(1):t(end),parsOK),'r')
HTH
3 Commenti
Più risposte (0)
Vedere anche
Categorie
Scopri di più su Matrix Indexing in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!