File Exchange

image thumbnail

IEEE 123 Node Test Feeder in Simscape Power Systems

version 1.0.0.0 (401 KB) by Graham Dudgeon
Build automatically the IEEE 123 Node Test Feeder and compare simulation to benchmark results

54 Downloads

Updated 03 Apr 2018

View License

This submission contains MATLAB scripts that will build automatically the IEEE 123 Node Test Feeder in Simscape Power Systems Specialized Technology. The model is a 'quasi-steady' model, meaning it captures an operating point in the minimum number of simulation steps. This is equivalent to a power flow, but enables multiple operating points to be assessed in a time-domain environment.
The IEEE 123 Node Test Feeder benchmark data is available for download at the following URL, http://sites.ieee.org/pes-testfeeders/files/2017/08/feeder123.zip, and is based on the following reference,
Kersting, W.H., "Radial distribution test feeders," Power Engineering Society Winter Meeting, 2001. IEEE , vol.2, no., pp.908,912 vol.2, 2001doi: 10.1109/PESW.2001.916993
URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=916993&isnumber=19809

Cite As

Graham Dudgeon (2020). IEEE 123 Node Test Feeder in Simscape Power Systems (https://www.mathworks.com/matlabcentral/fileexchange/66599-ieee-123-node-test-feeder-in-simscape-power-systems), MATLAB Central File Exchange. Retrieved .

Comments and Ratings (42)

Chulin Xu

hi, after I create_IEEE_123, it pops up the bus 195 was removed as it did not appear to be connected. and a lot of warning about Column headers from the file were modified to make them valid MATLAB identifiers before creating variable names for the table. The original
column headers are saved in the VariableDescriptions property.
Set 'VariableNamingRule' to 'preserve' to use the original column headers as table variable names.
Anyone may know what is going wrong?

文琛 赵

I download the MATLAB 2019a and now the 'create_IEEE_123' is OK.

文琛 赵

文琛 赵

文琛 赵

Thank you for your contributions. But there are some problems for me to use this project .I use the MATLAB 2020a , have place the 'feeder123' directory into the 'benchmark_data' directory. And the 'resources' folder is added to the path. But when I run the creat_IEEE_123.m, there are some errors like 'error IEEE_123_data(line 453) regulator_data ,errorcreate_IEEE_123 (line 11) IEEE_123_data,error regulator_data (line 28) [c1,c2] = strsplit(T1.Var1{2},'-');
So what's wrong with this project?

Hanim Basarudin

I found the solution for the error "unrecognized function or variable 'IEEE_123_data'":
Copy and paste everything from 'resources' folder into 'create-model' folder, and run create_IEEE_123.

ANIL LAMICHHANE

I experience the following error as experienced by Adam S, I am using Matlab R2020a
Unrecognized function or variable 'IEEE_123_data'.

Error in create_IEEE_123 (line 11)
IEEE_123_data

Graham Dudgeon

Adam - also change line 8 in regulator_data.m to T = readtable('regulator data.xls','format','auto');

Graham Dudgeon

Adam - there may have been a format change in the data. Let me take a look and provide guidance once I have a clearer picture.

Adam s

Yes, I have the feeder123 folder in the benchmark_data folder. When I run the create_IEEE_123.m file in matlab 2020a I get:
>> create_IEEE_123
Unrecognized function or variable 'IEEE_123_data'.

Error in create_IEEE_123 (line 11)
IEEE_123_data

Graham Dudgeon

Adam - have you downloaded the data? The IEEE 123 Node Test Feeder benchmark data is available for download at the following URL, http://sites.ieee.org/pes-testfeeders/files/2017/08/feeder123.zip,

Abde - The model performs quasi-steady simulation, not load flow, but gives the same result. The XY coordinates were hand derived from the circuit diagram.

Adam s

for matlab 2018b does data.loads = readtable('spot loads data.xls','Sheet','Sheet1','Range','A4:H89') need to be
this data.loads = readtable('spot loads data.xls','Sheet','Sheet1','Range','A5:H89') ?

Adam s

Seems a mat file is missing?
Unrecognized function or variable 'IEEE_123_data'.

Error in create_IEEE_123 (line 11)
IEEE_123_data

abde amar

Hello,
Thank you so much Graham,
Load flow method not appears in the code??
In the other hand, How X and Y coordinates are determined??

Your responses are very helpful
thanks

Miroslav Blagojevic

This was a huge work; thank you.
Why there is only 76 outputs in the “inputs” block? According to the adopted approach, there should be (85 x 1)+(5 x 2) = 95 outputs (out of 85 loads, five are three-phase loads). And also, cell array “tagPQ” has only 76 cells instead of 95?
Regarding the model overall, is there anything I could do to improve its ability to simulate transient phenomena?

Soufiane El M

Hi, thank you for your great contributions. I have two question for you, what must be changed to model another network? Are the functions valid for any type of network? I would like to apply your modeling method for a LV network.
Thank you for your answers.

ZHENG Zhuang

Hi, thank you for your great contributions. but I have one question for you. What is the back-end algorithm for power flow calculation? Newton-Raphson algorithm or the others? I didn't see any code part for this kind of calculation?

Ricky Sun

Hello
When running the model and run "create_IEEE_123.m"
l get the following wrong:

Referenced a field that does not exist 'buses'。

wronge bus_placement (line 10)
nl = numel(data.buses.Bus_No);

wronge create_IEEE_123 (line 21)
bus_placement(mdl,data)

Graham Dudgeon

Ray - It may be that 'blank_canvas.slx' has blocks that need removed - this may happen if you try running segments of the code and then hit save on the blank_canvas by mistake - there should be nothing in blank_canvas except input and output signaling subsystems and a powergui.

Ray

Hello,
When running the model for the first time I get this error:

Error using bus_placement (line 14)
A new block named 'blank_canvas/1' cannot be added

Error in create_IEEE_123 (line 21)
bus_placement(mdl,data)

Please Help

SK SHEZAN AREFIN

Following error is showing

Error evaluating parameter 'NominalParameters' in 'Australian14gen_R2018a/BPS_2/201'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Reactances1' in 'Australian14gen_R2018a/BPS_2/201'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'TimeConstants2' in 'Australian14gen_R2018a/BPS_2/201'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Mechanical' in 'Australian14gen_R2018a/BPS_2/201'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Pref' in 'Australian14gen_R2018a/BPS_2/201'
Undefined function 'p' for input arguments of type 'double'.
Variable 'p' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error due to multiple causes.
Caused by:
Error evaluating parameter 'NominalParameters' in 'Australian14gen_R2018a/CPS_4/402'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Reactances1' in 'Australian14gen_R2018a/CPS_4/402'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'TimeConstants2' in 'Australian14gen_R2018a/CPS_4/402'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Mechanical' in 'Australian14gen_R2018a/CPS_4/402'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Pref' in 'Australian14gen_R2018a/CPS_4/402'
Undefined function 'p' for input arguments of type 'double'.
Variable 'p' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'InductivePower' in 'Australian14gen_R2018a/Comp2-212'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'CapacitivePower' in 'Australian14gen_R2018a/Comp2-212'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'InductivePower' in 'Australian14gen_R2018a/Comp3-216'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'CapacitivePower' in 'Australian14gen_R2018a/Comp3-216'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'InductivePower' in 'Australian14gen_R2018a/Comp4-409'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'CapacitivePower' in 'Australian14gen_R2018a/Comp4-409'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'InductivePower' in 'Australian14gen_R2018a/Comp5-411'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'CapacitivePower' in 'Australian14gen_R2018a/Comp5-411'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'InductivePower' in 'Australian14gen_R2018a/Comp6-414'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'CapacitivePower' in 'Australian14gen_R2018a/Comp6-414'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'InductivePower' in 'Australian14gen_R2018a/Comp7-415'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'CapacitivePower' in 'Australian14gen_R2018a/Comp7-415'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'InductivePower' in 'Australian14gen_R2018a/Comp8-416'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'CapacitivePower' in 'Australian14gen_R2018a/Comp8-416'
Caused by:
Undefined function 'comp' for input arguments of type 'double'.
Variable 'comp' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Invalid setting in 'Australian14gen_R2018a/Constant' for parameter 'Value'.
Caused by:
Error evaluating parameter 'Value' in 'Australian14gen_R2018a/Constant'
Undefined function 'SVC' for input arguments of type 'double'.
Variable 'SVC' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Invalid setting in 'Australian14gen_R2018a/Constant1' for parameter 'Value'.
Caused by:
Error evaluating parameter 'Value' in 'Australian14gen_R2018a/Constant1'
Undefined function 'SVC' for input arguments of type 'double'.
Variable 'SVC' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Invalid setting in 'Australian14gen_R2018a/Constant2' for parameter 'Value'.
Caused by:
Error evaluating parameter 'Value' in 'Australian14gen_R2018a/Constant2'
Undefined function 'SVC' for input arguments of type 'double'.
Variable 'SVC' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Invalid setting in 'Australian14gen_R2018a/Constant3' for parameter 'Value'.
Caused by:
Error evaluating parameter 'Value' in 'Australian14gen_R2018a/Constant3'
Undefined function 'SVC' for input arguments of type 'double'.
Variable 'SVC' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Invalid setting in 'Australian14gen_R2018a/Constant4' for parameter 'Value'.
Caused by:
Error evaluating parameter 'Value' in 'Australian14gen_R2018a/Constant4'
Undefined function 'SVC' for input arguments of type 'double'.
Variable 'SVC' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error due to multiple causes.
Caused by:
Error evaluating parameter 'NominalParameters' in 'Australian14gen_R2018a/EPS_2/202'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Reactances1' in 'Australian14gen_R2018a/EPS_2/202'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'TimeConstants2' in 'Australian14gen_R2018a/EPS_2/202'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Mechanical' in 'Australian14gen_R2018a/EPS_2/202'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Pref' in 'Australian14gen_R2018a/EPS_2/202'
Undefined function 'p' for input arguments of type 'double'.
Variable 'p' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error due to multiple causes.
Caused by:
Error evaluating parameter 'NominalParameters' in 'Australian14gen_R2018a/GPS_4/404'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Reactances1' in 'Australian14gen_R2018a/GPS_4/404'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'TimeConstants2' in 'Australian14gen_R2018a/GPS_4/404'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Mechanical' in 'Australian14gen_R2018a/GPS_4/404'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Pref' in 'Australian14gen_R2018a/GPS_4/404'
Undefined function 'p' for input arguments of type 'double'.
Variable 'p' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error due to multiple causes.
Caused by:
Error evaluating parameter 'NominalParameters' in 'Australian14gen_R2018a/HPS_1/101'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Reactances2' in 'Australian14gen_R2018a/HPS_1/101'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'TimeConstants1' in 'Australian14gen_R2018a/HPS_1/101'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Error evaluating parameter 'Mechanical' in 'Australian14gen_R2018a/HPS_1/101'
Undefined function 'G_data' for input arguments of type 'double'.
Variable 'G_data' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-1-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-1-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-1-1'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-1-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-1-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-1-2'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-10-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-10-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-10-1'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-10-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-10-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-10-2'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-11'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-11'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-11'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-12-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-12-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-12-1'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-12-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-12-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-12-2'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-12-3'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-12-3'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-12-3'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-13'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-13'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-13'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-14-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-14-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-14-1'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-14-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-14-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-14-2'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-15-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-15-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-15-1'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-15-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-15-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-15-2'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-16'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-16'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-16'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-17'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-17'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-17'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-18'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-18'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-18'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-19'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-19'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-19'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-2-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-2-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-2-1'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-2-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-2-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-2-2'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-20-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-20-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-20-1'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-20-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-20-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-20-2'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-21-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-21-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-21-1'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-21-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-21-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-21-2'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-22'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-22'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-22'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-23'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-23'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-23'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-23-NEW'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-23-NEW'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-23-NEW'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-24-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-24-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-24-1'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-24-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-24-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-24-2'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-25'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-25'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-25'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-26'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-26'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-26'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-27-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-27-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-27-1'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-27-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-27-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-27-2'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-28'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-28'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-28'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-29-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Inductances' in 'Australian14gen_R2018a/L-29-1'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Capacitances' in 'Australian14gen_R2018a/L-29-1'
Caused by:
Undefined function 'mrdivide' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mrdivide' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Error evaluating parameter 'Resistances' in 'Australian14gen_R2018a/L-29-2'
Caused by:
Undefined function 'mtimes' for input arguments of type 'matlab.graphics.primitive.Line'.
Variable 'mtimes' does not exist.
Suggested Actions
Load a file into base workspace.
Fix
Create a new variable.
Fix
Component:Simulink | Category:Model error
Too many errors.
Component:Simulink | Category:Model error

Aaron Robertson

Hello,

I am attempting to run this simulation for the first time, after downloading and unzipping the feeder123 zip file, running the create_IEEE_123.m file brings up an error in setup_IEEE_123 saying:

'Error using setup_IEEE_123 (line 455) No system or file called 'IEEE_123_COMPLETE' found."

Is there a solution to this?

Aaron.

Graham Dudgeon

Hi Thomas. Good catch. 'resources' is a reserved directory name from R2019a. Change the name (such as to 'resources1') and you should be good to go.

I get the following error when trying to run:
Warning: Adding folders named 'resources' to the path is not supported:
D:\MATLAB\IEEE_123_Node_Test_Feeder_EXTERNAL_SHARE\resources
> In path (line 109)
In addpath (line 86)
Please, how can I fix it? I'm running with 2019a.

Pujari Harish Kumar

Graham Dudgeon

Yes, you can use line_placement and the other scripts for building other networks. You will need to change the main data structure that contains network information.

sibabalo noludwwe

can I use the line_placement file for other feeders like a 9 bus system

Graham Dudgeon

Customized blocks have been used as the system required one-phase, and two- and three-phase unbalanced components.

Manswet Banka

Why doesn't this model use Three-Phase Dynamic Loads (and other typical components like lines) from Simscape library and uses the nonstandard models of these components instead?

Rushi Raval

not compatible with r2016a

ASHOK KUMAR

For Latest Simulation Projects,Please Contact http://asokatechnologies.in/

Graham Dudgeon

The scripts are compatible with R2017b and later

nina hu

shahrzad mahdavi

hi,
how the system calculate taps when OLTC is active and taps are not fix? because I checked the taps' result and they are different.

Graham Dudgeon

GJ and Praveen - please contact me through my author profile link so I may help you.

GJ

I recieve the following message:

Error using line_placement (line 77)
SubSystem block does not have a parameter named 'config'

Error in create_IEEE_123 (line 25)
line_placement(mdl,data)

Any hints?

praveen tiwari

. I received this error while running the file "Undefined function 'abs' for input arguments of type 'cell'". Please help praveen.1983tiwari@gmail.com

Muhammad Ahsan Zamee

Graham Dudgeon

From the README.txt file...

**** Before you start you must download the network data from the following URL

http://sites.ieee.org/pes-testfeeders/files/2017/08/feeder123.zip

Once unzipped, place the 'feeder123' directory into the 'benchmark_data' directory.

Run startup.m

Navigate to create_model directory.

>> create_IEEE_123

ali esmaeelnia

'C:\Users\Negare\Documents\MATLAB\IEEE_123_Node_Test_Feeder_EXTERNAL_SHARE\IEEE_123_Node_Test_Feeder_EXTERNAL_SHARE\resources\spot
loads data.xls' not found. HOW TO SOLVE IT?

Yong En Lee

In order to get 'create_IEEE_123' to work,
change 'regulator rata.xls' to 'Regulator Data.xls' in regulator_data.m line 8

MATLAB Release Compatibility
Created with R2017b
Compatible with any release
Platform Compatibility
Windows macOS Linux
Tags Add Tags

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!