Interfacce di dati e funzioni C

Mappare gli elementi dati e le funzioni del modello a definizioni di codice indipendenti dal modello

Per rispettare gli standard e le linee guida del codice, integrare il codice generato con quello esterno e soddisfare i requisiti di memoria, configurare la rappresentazione degli elementi dati del modello e delle funzioni entry-point per la generazione di codice. Configurare gli elementi dati e le funzioni del modello mappandoli alle definizioni di codice predefinite dal prodotto o create con il dizionario Embedded Coder. Per gli elementi dati, è inoltre possibile mapparli alle definizioni di codice create nei pacchetti tramite Custom Storage Class Designer.

Per un'introduzione, vedere C Data Code Interface Configuration for Model Interface Elements.

Strumenti

Code Mappings Editor – C

Associate model elements with code interface definitions

Oggetti

`coder.mapping.api.CodeMapping`	Model data and function interface configuration for C code generation
`coder.mapping.api.CoderDictionary`	Query and set the code settings of dictionary defaults in an Embedded Coder dictionary within a Simulink data dictionary

Funzioni

espandi tutto

Entry-point generati

`model_initialize`	Generated C/C++ entry-point function that contains initialization code for a Simulink model
`model_reset`	Generated C/C++ entry-point function that contains reset code for a Simulink model
`model_step`	Generated C/C++ entry-point function that contains execution code for each step in a Simulink model
`model_terminate`	Generated C/C++ entry-point function that contains termination code for a Simulink model

Configurazione degli elementi del modello per la generazione di codice C

Creazione e individuazione di Code Mappings

`coder.mapping.api.get`	Get code mappings for model
`coder.mapping.utils.create`	Create code mappings object for configuring data and function interface for C and C++ code generation
`find`	Get model elements for the category of model code mappings

Configurazioni predefinite

`getDataDefault`	Get default storage class or storage class property setting for model data category
`getFunctionDefault`	Get default function customization template or memory section for model functions category
`setDataDefault`	Set default storage class and storage class property values for model data category
`setFunctionDefault`	Set default function customization template and memory section for model functions category

Configurazione delle funzioni

`getFunction`	Get code configuration from code mappings for model function
`setFunction`	Set coder mapping information for model function

Configurazione delle porte di input e di output a livello di radice

`getInport`	Get code and calibration configuration from code mappings for root-level inport
`getOutport`	Get code and calibration configuration from code mappings for root-level outport
`getDeploymentType`	Get deployment type of model (Da R2022a)
`setInport`	Configure root-level inports for code and calibration file (a2l) generation
`setOutport`	Configure root-level outport for code and calibration file (a2l) generation
`setDeploymentType`	Set deployment type of model (Da R2022a)

Configurazione dei parametri

`getModelParameter`	Get code and calibration configuration from code mappings for model parameters
`getModelVariantControl`	Get code configuration from code mappings for `Simulink.VariantControl` object (Da R2025a)
`getModelVariantVariable`	Get code configuration from code mappings for `Simulink.VariantVariable` object (Da R2025a)
`setModelParameter`	Configure model parameter for code and calibration file (a2l) generation
`setModelVariantControl`	Configure `Simulink.VariantControl` object for code generation (Da R2025a)

Configurazione del segnale, dello stato e dell'archivio di dati

`addSignal`	Add block output signal to model code mappings
`getDataStore`	Get code and calibration configuration from code mappings for local or shared local data store
`getSignal`	Get code and calibration configuration from code mappings for block output signal
`getState`	Get code and calibration configuration from code mappings for block state
`removeSignal`	Remove block output signal from model code mappings
`setDataStore`	Configure local or shared local data store for code and calibration file (a2l) generation
`setSignal`	Configure block signal data for code and calibration file (a2l) generation
`setState`	Configure block states for code and calibration file (a2l) generation

Configurazione del dizionario Coder

`setDataDefault`	Set default code settings for data category
`getDataDefault`	Get default code settings for data category
`setFunctionDefault`	Set default function customization template and memory section for model functions category
`getFunctionDefault`	Get default function customization template or memory section for model functions category

Argomenti

Nozioni di base sulla configurazione

C Data Code Interface Configuration for Model Interface Elements
Control the representation of model data elements and functions in generated C code by using a data code interface configuration.
Code Definition and Mapping Limitations and Considerations
Restrictions, constraints, and considerations that apply to code definitions and code mappings.
Configure Default C Code Generation for Categories of Data Elements and Functions
Apply default code generation configurations for categories of model data and functions across a model.
Manage Multiple Code Mappings for a Model
Design models that are platform-neutral and ready to deploy to different run-time environments.
Protect Global Data with const and volatile Type Qualifiers
Prevent data corruption and improve code safety by applying C type qualifiers const and volatile to global data in generated code.
How Generated Code Exchanges Data with an Environment
The generated code exchanges signal, state, and parameter data with the calling environment through a data interface.
Configure Generated Code According to Interface Control Document Specifications
Configure code generation settings for a model according to specifications from an interface control document.
Migration of Model Data Configurations to Code Mappings
How Simulink^® migrates code definitions for models created before release R2020b to code mappings and related information to consider.
Migration of Memory Section and Shared Utility Settings from Configuration Parameters to Code Mappings
For models created before release R2018a, how Simulink migrates memory section and shared utility function configuration parameter settings to model code mappings for C code generation.
Compare Code Mappings of Simulink Models
Compare the mappings of models using the Simulink Comparison Tool.

Configurazione dei dati C

Choose Data Configuration Approach
Make decisions about the design data used by your model based on your code generation requirements.
Configure Root-Level Inport Blocks for C Code Generation
Set the storage class and other relevant code generation properties for root-level Inport blocks.
Configure Root-Level Outport Blocks for C Code Generation
Set the storage class and other relevant code generation properties for root-level Outport blocks.
Configure Signal Data for C Code Generation
Set the storage class and other relevant code generation properties for signal data.
Configure Parameters for C Code Generation
Set the storage class and other relevant code generation properties for parameters.
Configure Block States for C Code Generation
Set the storage class and other relevant code generation properties for block states.
Configure Data Stores for C Code Generation
Set the storage class and other relevant code generation properties for data stores.
Choose Storage Class for Controlling Data Representation in Generated Code
Choose a storage class to apply to data elements in a model, such as signals, states, and block parameters.
Use Built-In and Predefined Storage Classes to Represent Data in Generated Code
Use built-in or predefined storage class to represent data based on their predefined and customizable properties.
Control Placement of Global Data Definitions and Declarations in Generated Files
Modularize the generated code and establish clear ownership of global data by controlling the file placement of each declaration and definition.
Design Data Interface by Configuring Inport and Outport Blocks
Customize the data interface of a model to enable integration of the generated code with your own code and to improve code traceability and readability.

Configurazione delle funzioni C

Configure Generated C Function Interface for Model Entry-Point Functions
Learn about generated C entry-point functions, configuration options, and how to interface with them.
Control Data and Function Interface in Generated Code
Control how generated code exchanges data with a calling environment.
Configure C Entry-Point Function Interfaces for Simulink Function and Function Caller Blocks
Customize C entry-point function names and step function arguments for Simulink Function and Function Caller blocks.
Generate Modular Function Code for Nonvirtual Subsystems
Generate modular function code for nonvirtual subsystems.
Rapid Prototyping Model Functions
Generate rapid prototyping code.
Control File Packaging of Generated Entry-Point Functions and Simulink Functions
This example shows how to specify custom filenames for entry-point functions and Simulink® functions using function customization templates.

Personalizzazione delle funzioni C generate

Customize C Functions Generated from Simulink Functions

Learn how to customize C functions generated from Simulink Function blocks.
Customize C Functions Generated from Atomic Subsystems
Learn how to customize functions generated from Atomic Subsystem blocks.
Customize Generated Entry Point C Functions

Customize generated entry-point C functions, intended to interface your external code.

Accesso ai dati e inizializzazione

Create Tunable Calibration Parameter in the Generated Code
In the generated code, create tunable parameter data that you can access during rapid prototyping and calibration.
Reuse Parameter Data in Different Data Type Contexts
Reuse parameter data by creating a Simulink.Parameter object or numeric MATLAB^® variable that you can use in different data type contexts.
Limitations for Block Parameter Tunability in Generated Code
Limitations can prevent a block parameter from appearing in the generated code as tunable, which means you cannot interact with the parameter value after compiling the code.
Access Signal, State, and Parameter Data During Execution
As you iteratively develop a model, capture output signal and state data that model execution generates. Tune parameter values during execution to observe results on the outputs.
Switch Between Sets of Parameter Values During Simulation and Code Execution
Switch between independent sets of values for the same block parameters by storing the sets in an array of structures.
Preserve Variables in Generated Code
As you iteratively develop a model, you can tune block parameter values during simulation or execution of generated code to observe the results on signal and state values.
Configure Packaging of Parameter Arguments in Generated Code
Customize the implementation of parameter arguments in generated code.
Control Signal and State Initialization in the Generated Code
Generate code that enables you to store tunable initial conditions in memory, for example, for modeling a system that shuts down and restarts.
Initialization of Signal, State, and Parameter Data in the Generated Code
To match the numerics of a simulation in Simulink, the generated code assigns initial values to global data, especially for block states and parameters.
Compile Code Conditionally for All Values of Variant Parameters with Same and Different Dimensions
This example shows how to generate a C code that contains all the active and inactive values of variant parameters.

Informazioni complementari

Generated Code Interfacing

Esempi in primo piano

Configure Model Data Interface for C Code Generation

Configure data elements in a model, such as block parameters and signal lines, so that corresponding variables appear in generated code.

Apri live script

Generate Reentrant, Multi-Instance Code

Configure a model for reentrant, multi-instance code generation. Multiple programs can use reentrant code simultaneously. When you configure a model for reentrancy, the execution (step) entry-point function uses root-level input and output arguments instead of global data structures. After examining the configuration settings, generate and review the generated code.

Apri script