Filtering FIRCLS1 and evaluate kernel and its power spectrum
1 visualizzazione (ultimi 30 giorni)
Mostra commenti meno recenti
Dear all,
I would like to filter my data using FIRCLS1. Unfortunately I did not get out filtered data. Filter properties are:
order = round (8*srate/cutoff); % length of the filter kernel in the time domain
cutoff_cls1 = 0.3; % normalized cutoff value corresponding to nyquist
pb_ripple = 0.0002; % upper bound: bandpass (PB) ripple (Durchlassbereich: oberhalb der Grenzfrequenz von 3Hz)
sb_ripple = 0.0002; % lower bound: bandstop (SB) ripple (Bandsperre unterhalb der Grenzfrequenz von 3Hz))
Ideal filter response:
shape_cls = [1 1 0 0]; % y-axis
frex_cls = [0, cutoff_cls1 * 10 , cutoff_cls1 * 10, srate/2] / (srate/2); % z-axis
Generate filter kernel
filtkern_cls1 = fircls1 (order,cutoff_cls1, pb_ripple, sb_ripple);
FFT to inspect the power spectrum of the kernel
hz_filtkern_cls1 = linspace (0, (srate/2), (pnts_first_last (1,:)/2) + 1);
filtkernX_cls1 = abs (fft (filtkern_cls1, pnts_first_last (1,:)));
Some plotting
% % evaluate filter kernel and its power spectrum
%
figure (7), clf
subplot (221)
plot ((-order / 2 : order/2) /srate, filtkern_cls1, 'k', 'linew', .5);
xlabel ('time [sec]')
title ('filter kernel (fircls1)')
%
% % plot the ideal filter
%
figure (7),
subplot (222); hold on;
plot (frex_cls * srate/2, shape_cls, 'r', 'linew', 1)
set (gca, 'xlim', [0 6])
set (gca, 'ylim', [0 2])
%
% % plot the power spectrum of the filter kernel
%
plot (hz_filtkern_cls1, filtkernX_cls1 (1:length (hz_filtkern_cls1)), 'k')
xlabel ('frequency (Hz)')
ylabel ('gain')
title ('filter kernel spectrum')
hold off;
%
Apply the filter to the signal
for i=1:numel(data)
data(i).filt_first_last_cls1 = filtfilt(filtkern_cls1, 1, data(i).acc_pelvis_first_last);
end
further plotting
subplot (2, 2, [3 4])
plot (data(1).timevec_first_last, data(1).filt_first_last_cls1)
set (gca, 'xlim', [200 215])
xlabel ('time (sec)')
ylabel ('amplitude')
title ('filtered acceleration signal pair1_FIRCLS1')
The result is not I would expect. The power spectrum of the kernel ends at 300 Hz instead of 3 Hz (see black line; ther red one is the the ideal filter response. Subsequently data is not filterd as prefered:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/927749/image.jpeg)
Does anyone has a suggestion?
Kind regards,
Jonas
1 Commento
Star Strider
il 15 Mar 2022
Use the freqz function to see the Bode plot of the fillter. That will tell you if it is designed correctly.
Risposte (1)
Vedere anche
Categorie
Scopri di più su Pulsed Waveforms in Help Center e File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!